LAWO edge, Руководство пользователя

Страница: 147 / 154

edge - User Manual
Version: 1.0.13/1 Exported on: 22 February, 2024 147 / 154
•
•
•
•
9.5 .edge - Replacing a Rear I/O Plate
The following procedure can be used to fit or exchange a rear I/O plate.
Overview
Each .edge frame can be fitted with up to 4 x I/O plates (fitted to the rear).
The rear I/O plates are hot-pluggable and so it is possible to add or replace a plate while the frame is powered.
What you will need
1 x Torx10 driver - included in the Lawo toolkit supplied with the system.
1 x HD-BNC removal tool - included in the Lawo toolkit.
1 x .edge rear I/O plate -
ordered using the part numbers .edge_gateway (for a complete SDI I/O package)
or A00/50 (for a replacement I/O plate).
1 x .edge rear slot blanking panel - if you wish to operate the frame without an I/O plate. This can be ordered using the
part numb
er: .edge_frame_blind_plate_rear .