LAWO edge, Руководство пользователя

Страница: 64 / 154

edge - User Manual
Version: 1.0.13/1 Exported on: 22 February, 2024 64 / 154
•
1.
2.
3.
4.
5.
•
•
•
•
Delete - opens a pop-up where you can delete the selected file(s) from the HOME system. This can be useful to remove
obsolete files (e.g. for a processing blade that has been replaced).
Step Two - Fetching the Licenses
Once the licensing files are uploaded to HOME, the next step is to load the licenses to each processing blade.
Open the Advanced parameters (using the HOME Web UI).
From the parameter tree (on the left), select License Configuration .
To the right of the Fetch License field, click on Trigger Event - the processing blade fetches the license(s) from the
licensing file.
The processing blade goes offline, temporarily, in order to reboot and load the new license(s).
Following a successful operation, the
Status field updates.
Step Three - Activating the Licensed Feature(s)
The final step is to choose which licenses are active, or how they are assigned using the License Configuration page (in
HOME's Advanced parameters).
License Configuration (main page)
From the main page, you can configure the operating mode and SDI interfacing. There are then two sub-pages where you
can assign the licenses for 3G UHD Gearboxing and Input Frame Synchronization.
In each case, you must edit the parameter field(s) and then push the changes to the processing blade as follows:
To the right of the TAKE Configuration Changes field, click on Trigger Event .
The processing blade goes offline, temporarily, in order to reboot and load the new configuration.
Operating Mode 100G vs 25G
This parameter sets the operating mode of the processing blade. There is one informational field ( 100G License ) and one
adjustable parameter ( Operating Mode 100G vs 25G ).
If a 100G License is Available , then the Operating Mode can be set to either 25G 4xSFP or 100G 2xQSFP .
If a 100G License is Unavailable , then only one mode is possible: 25G 4xSFP .
Any change to the operating mode must be pushed to the processing blade as follows: click on TAKE Configuration
Changes -> Trigger Event .