LAWO edge, Руководство пользователя

Страница: 57 / 154

edge - User Manual
Version: 1.0.13/1 Exported on: 22 February, 2024 57 / 154
Note that the active ports are defined by the operating mode (either 4 x 25GbE or 2 x 100GbE).
Configuration via HOME
In HOME, there are two ways to edit the network settings for a processing blade: via the Network Ports tab or Advanced
parameters. Here we describe the Network Ports tab, as this is the best/simplest method for most applications.
From the main "Devices" list, click on the processing blade label (to open the "Device Details" as described earlier). The
Network Ports tab lists all of the active network ports.
Device → Network Ports
From here you can quickly check the status of all network ports or edit the IP settings of a port (as shown below).
The table shows information about each network port including the link state, label, description, internal name, media
interface, MAC address, IP address, IP assignment and subnet. Scroll to the right to view more information such as the link
speed, switch name, etc.
In edit mode, you can change the IP Address Assignment , IP Address (for Static assignments), Network Mask , Gateway
and Primary / Secondary Name Servers . If you need access to more technical parameters, then these can be reached from
the Network Ports branch of the Advanced parameters.
Editing the IP Settings of a Network Port