Kyocera 7135 - Smartphone - CDMA2000 1X, Справочное руководство

Страница: 194 / 224

186 Kyocera 7135 Smartphone Reference Guide
Making and answering calls with Voice Dial
5.
When you hear the voice prompt, speak the command word. Repeat it when you are
instructed to do so.
6.
Follow the instructions until the voice prompt says “Training completed.”
Making and answering calls with Voice Dial
To make a call using voice commands
1.
Connect a headset to the phone.
2.
Activate voice dialing using one of the following methods:
■
If the phone is in the cradle or attached to external power, say “Wake-up” and wait for the
beep. After the beep, say “Wake-up” again. If you prefer to use a different command than
“Wake-up,” you can train the phone to respond to another word.
■
If the phone is not in the cradle or attached to external power, press . The message
“Speak a name or press to redial” appears on the screen. The voice prompt says
“Speak a name.”
3.
Speak the name of the person you want to call.
■
If the phone recognizes the name from your Voice Book, the voice prompt says
“Calling [name]” and places the call.
■
If the phone does not recognize the name, the voice prompt says “Did you say ______?”
and fills in the closest name match in your Voice Book. Answer “Yes” or “No” until the
voice prompt speaks the correct name and places the call.
To answer a call using voice commands
1.
Place the phone in the cradle or attach it to external power.
2.
Connect a headset to the phone.
3.
Make sure the phone is not set to vibrate instead of ringing. (See “Setting Incoming Call
preferences” on page 152 .)
4.
Turn Auto-answer off. (See “Setting Flip preferences” on page 151 .)
When you receive an incoming call, the voice prompt says “Incoming call. Answer?” or
“Incoming roam call. Answer?” This message is given twice. If you do not respond,
the phone rings.
5.
To accept the call, answer “Yes” or press any key except .
6.
To reject the call, answer “No” or press .