6 | Function description
Temporarily editing the soldering profile in the [Rework] tab
5 Parameter bar with tabs [Informa-
tion] and [Heater config]. With re-
gard to this, please read Chapter
The tabulators [Information],
[Heating setting] and the arrow
key [Image processing].
The machine initialisation and the
Rework process can only be star-
ted here with the [0024] but-
ton.Start
6 Workflow bar for determining
process flow steps (from left to
right). Any change that is made
here to the process flow will be
accepted but not saved. If you
switch from tab [Rework] to an-
other tab, all changes made to the
soldering profile will be lost. With
regard to this, please read
Chapter The [Process Automa-
tion] button row [
The functions of tab [Rework] largely correspond to those of tab [Profile manage-
ment ]. For a description of tab [Profile management ] please read Chapter Editing
the soldering profile in the [Profile management] tab and changing it permanently
[
Only users logged in as “Administrator” may access all functions. If you are logged
in as a “standard user,” you may not save changes, and the [0502] tab is not vis-
ible.Profile management
The functions of tab [Rework] are described in detail in the following chapter.
Ersa GmbH
Operating_instructions HR 500 DE 3BA00246-01 | Rev. 1
57 / 124
Содержание HR 500
Страница 2: ......
Страница 6: ......
Страница 20: ...2 Technical data PC system requirements Ersa GmbH Operating_instructions HR 500 DE 3BA00246 01 Rev 1 20 124 ...