Kurtz Ersa HR 500, Перевод оригинального руководства по эксплуатации

Страница: 54 / 124

6 | Function description
Switching on the Rework system and starting HRSoft 2
7 Blower outlet for cooling after soldering 18 Red Cancel key to immediately end the current
work step.
8 Milling groove for calibration target (for the cal-
ibration of the optical axle)
19 Next button. Soldering wizard switched to the
next work step
9 Component tray with recess for dip-template
and print-template
20 ESD wrist band connection
10 Connectors for PC and further optional equip-
ment
21 Unlock button for releasing the bottom heating
11 Connectors for two thermocouples 22 Setscrew for fine adjustment of the board in X
direction
6.3 Switching on the Rework system and starting HRSoft 2
ü To switch on the Rework System proceed as follows:
a) Switch on the PC.
b) Use the main switch to turn on the Rework System.
c) Start the HRSoft 2 program on the PC. Double-click the icon of the [HRSoft 2]
link on the computer desktop.
d) Window [Login] will be displayed on the computer monitor.
Anmelden
LOGIN
Close application
Remember me
V. 1.1.5.3812
Username
Password
e) Enter the values Username and Password (pay attention to letter capitaliza-
tion) and press the Enter button.
When button [Remember me] is highlighted, your Username is already saved
for the next login.
ð The HRSoft 2 program will open in tab [Rework] and depending on the
password level, in mode [Administrator] or [Standard user].
ð If the network connection icon top right or next to the temperature display
turns green, the connection between the Rework System and the PC is es-
tablished.
Ersa GmbH Operating_instructions HR 500 DE 3BA00246-01 | Rev. 1 54 / 124