- 13 -
GB
NOTE
The Translux 2Wave power supply unit (6) is supplied with
three interchangeable adapters:
Fig. (6 a)
= Europe type 1
Fig. (6 b)
= UK
type 2
Fig. (6 c)
= US / JP type 3
1
Select the correct adapter between the ones available: Europe – Type 1, UK – Type 2, US / JP – Type 3.
2
Each adapter has a slot into which the retaining latch on the power supply unit fi ts.
3
With the slot oriented toward the power supply unit, place the adapter onto the power supply unit so that the slides
on the adapter are aligned with their respective slots on the power supply unit.
4
Pressing down on the adapter and power supply unit, slide the adapter into the power supply unit until a click
is heard and the adapter is locked in place.
NOTE
Pressing down on the adapter during installation ensures that all the slides are held by the retainers on the
power supply unit. If the adapter feels loose, remove it and re-install.
5
To remove the adapter from the power supply unit, press the latch retainer button (marked with the word “
PUSH
”)
and slide the adapter away from the power supply unit and remove the adapter.
6
Retain unused adapters for future use.
7
Connect the plug of the power cord into the socket on the underside of the charging unit.
WARNING
Check the power cable, the power supply unit and the adapter regularly to make sure that they are in good
condition.
If damage is apparent do not use damaged part until it is replaced.
Use original Kulzer spare parts and accessories only.
8
Plug the power supply unit with its adapter into the mains power outlet.
9
The GREEN LED on the charger unit will light up (icon
).
5.3
Inserting the battery into the hand piece
The Translux 2Wave is supplied with a powerful Lithium-ion rechargeable battery.
The battery is supplied separately in the device packaging and must be inserted into the hand piece before initial
operation.
WARNING
Carefully follow all the safety precautions described in the paragraph 3.2.3 (BATTERY – Safety precautions).
CAUTION
NEVER
place the hand piece in the charging unit without the battery inserted in the hand piece.
Insert the battery into the hand piece in the sequence described below:
1
Remove the battery from its packaging.
WARNING
Never
short circuit the terminals of the battery with any metal object as it could cause
a risk of burns, fi re and explosion.
2
Use a fl at tool (for example a coin) to unscrew counter-clockwise the battery cap of the
hand piece (Fig.
1
and
2
).
3
An arrow is marked on the battery case (Fig.
3
).
NOTE
This arrow indicates the orientation with which the battery must be inserted into the hand piece.
4
Slowly slide the battery with the arrow oriented toward the housing into the hand piece until it stops (Fig.
4
).
NOTE
If the battery is inserted in the wrong way (i.e. in the opposite direction of the arrow),
the hand piece will not function. In case the battery is inserted in the wrong way,
no damage is caused to the hand piece’s electronics.
1x
2x
1707_11667_GBA_Translux_2Wave_EU_NENA.indb GB13
1707_11667_GBA_Translux_2Wave_EU_NENA.indb GB13
07.09.17 16:22
07.09.17 16:22
