Korg M3, Руководство по параметрам

Страница: 621 / 647

M3 and MIDI CCs Responses to standard MIDI controllers
611
You can assign any control change number (CC#00–119) to
the Realtime Control Slider 5–8 or X–Y CC control. In this
case, the transmitted values will all be 0…127.
You can assign any control change number (CC#00–119) to
the KARMA Realtime Control switches and sliders. In this
case, sliders 1–8 will transmit values of 0…127, scenes will
transmit values of 0…7, and others will transmit values of 0
(Off) or 127 (On).
*1 In the M3 sequencer, bank select messages are normally
specified as program change events (“MIDI Event Edit”
Sequencer P4). However in some cases this will be
insufficient when you wish to change banks on an
external device. In such cases, you can use CC#00 and
CC#32 to specify the banks.
For information on the relation between bank select
numbers and the banks of your external device, refer to
the owner’s manual for your external device.
*2 Unlike conventional control changes, pitch bend range,
fine tune, and coarse tune settings are made using RPC
(Registered Parameter Control) messages. In Program,
Combination, Sequencer, and Sampling modes, you can
use RPC messages to control the bend range and tuning
for each program, Timbre (Combination), or Track
(Sequencer).
79 Filter EG intensity 0…127 filter EG intensity *4
80 SW1 modulation On/Off
0…63(Off ),
64…127(On)
corresponds to on/off when the SW1 function is set to SW1 Mod.
81 SW2 modulation On/Off
0…63(Off ),
64…127(On)
corresponds to on/off when the SW2 function is set to SW2 Mod.
82 Foot switch On/Off
0…63(Off ),
64…127(On) corresponds to on/off when the function of the assignable foot switch is set to
Foot SW
83 Controller (CC#83) 0…127 for controlling AMS or Dmod
84 – – –
85 X–Y moduX 0…127 equivalent to when the X–Y CC control function is set to XY +X Mod
86 X–Y modulation –X 0…127 equivalent to when the X–Y CC control function is set to XY –X Mod
87 X–Y moduY 0…127 equivalent to when the X–Y CC control function is set to XY +Y Mod
88 X–Y modulation –Y 0…127 equivalent to when the X–Y CC control function is set to XY –Y Mod
89…90 – – –
91 Effect depth 1 (send 2 level) 0…127 send 2 level
92
Effect depth 2 (Insert Effect 1–5 On/
Off ) 0…63(Off ),
64…127(On)
turn Insert effect 1…5 on/off *5
93 Effect depth 3 (send 1 level) 0…127 send 1 level
94
Effect depth 4 (master effect 1, 2 On/
Off ) 0…63(Off ),
64…127(On)
master effect 1, 2 on/off *5
95 Effect depth 5 (total effect On/Off )
0…63(Off ),
64…127(On)
total effect on/off *5
96 Data increment 0
97 Data decrement 0
98 NRPN(LSB) – LSB of NRPN
99 NRPN(MSB) – MSB of NRPN
100 RPN(LSB)
0 selects the pitch bend range *2
1 controls Fine Tune *2
2 controls Coarse Tune *2
101 RPN(MSB) 0 MSB of RPN
102 KARMA realtime control SW1 On/Off
0…63(Off ),
64…127(On) equivalent to on/off when CC#102 is assigned to KARMA realtime control
SW1
*7
103 KARMA realtime control SW2 On/Off
0…63(Off ),
64…127(On) equivalent to on/off when CC#103 is assigned to KARMA realtime control
SW2
*7
104 KARMA realtime control SW3 On/Off
0…63(Off ),
64…127(On) equivalent to on/off when CC#104 is assigned to KARMA realtime control
SW3
*7
105 KARMA realtime control SW4 On/Off
0…63(Off ),
64…127(On) equivalent to on/off when CC#105 is assigned to KARMA realtime control
SW4
*7
106 KARMA realtime control SW5 On/Off
0…63(Off ),
64…127(On) equivalent to on/off when CC#106 is assigned to KARMA realtime control
SW5
*7
107 KARMA realtime control SW6 On/Off
0…63(Off ),
64…127(On) equivalent to on/off when CC#107 is assigned to KARMA realtime control
SW6
*7
108 KARMA realtime control SW7 On/Off
0…63(Off ),
64…127(On) equivalent to on/off when CC#108 is assigned to KARMA realtime control
SW7
*7
109 KARMA realtime control SW8 On/Off
0…63(Off ),
64…127(On) equivalent to on/off when CC#109 is assigned to KARMA realtime control
SW8
*7
110 PAD1 trigger velocity 0…127 equivalent to when CC#110 is assigned to PAD 1 *7
111 PAD2 trigger velocity 0…127 equivalent to when CC#111 is assigned to PAD 2 *7
112 PAD3 trigger velocity 0…127 equivalent to when CC#112 is assigned to PAD 3 *7
113 PAD4 trigger velocity 0…127 equivalent to when CC#113 is assigned to PAD 4 *7
114 PAD5 trigger velocity 0…127 equivalent to when CC#114 is assigned to PAD 5 *7
115 PAD6 trigger velocity 0…127 equivalent to when CC#115 is assigned to PAD 6 *7
116 PAD7 trigger velocity 0…127 equivalent to when CC#116 is assigned to PAD 7 *7
117 PAD8 trigger velocity 0…127 equivalent to when CC#117 is assigned to PAD 8 *7
118 X–Y Mode X 0…127 equivalent to when CC#118 is assigned to the X–Y Mode X-axis *8
119 X–Y Mode Y 0…127 equivalent to when CC#119 is assigned to the X–Y Mode Y-axis *8