manualshive.com logo in svg

Korg M3, Руководство по параметрам

Поделиться
Скачать
Korg M3 Скачать руководство пользователя страница 104

Program mode

94

For more information, please see “Thru Out Z (Thru Out 
Zone)” on page 78.

Transpose Octave In Thru

[–0036...+0036]

Assigns the Transpose In Zone (Prog 7–1–1b) function. This 
controls the transposition of note data from the keyboard 
within the Key Zone, in octave units.

Transpose Octave Out Thru

[–0036...+0036]

Assigns the Transpose Out Zone (Prog 7–1–1b) function. 
This controls the transposition of note data from the 
keyboard outside the Key Zone, in octave units.

Transpose Octave/5th In Thru

[–0036...+0036]

Assigns the Transpose In Zone (Prog 7–1–1b) function. This 
controls the transposition of note data from the keyboard 
within the Key Zone, in units of an octave and a fifth.

Transpose Octave/5th Out Thru

[–0036...+0036]

Assigns the Transpose Out Zone (Prog 7–1–1b) function. 
This controls the transposition of note data from the 
keyboard outside the Key Zone, in units of an octave and a 
fifth.

Group: Random Seeds

Start Seed

[–8192...+0000...+8191]

Assign the Start Seed (Prog 7–1–6a) function.

+0000:

 Random

Other than +0000:

 Any desired Start Seed value. However, 

you cannot select values outside the range of -8192 to +8191 
when changing the value in this way.

For more information, please see “Start Seed” on page 82.

Note: If the Start Seed value is set to a value outside of this 
range when you first assign it as a RT Parameter, it will be 
limited to either end of the range.

Freeze Loop Length

[+0000...+0032]

Assigns the Freeze Loop Length (Prog 7–1–6a) function. 
This specifies the number of measures (bars) in the phrases 
that are repeatedly generated by the KARMA Module. After 
being triggered, the Module will generate a phrase of the 
number of measures you specify here, and will then repeat 
that phrase.

For more information, please see “Freeze Loop Length” on 
page 83.

Freeze Loop Reset

[+0000...+0032]

Like Freeze Loop Length, above, this also assigns the Freeze 
Loop Length

 (Prog 7–1–6a) function. However, when this is 

used, and the Start Seed is set to some other value than 0: 
Random, changing the Freeze Loop Length to any value 
except 0: Off will reset the Start Seed internally to the 
indicated value, thereby restoring the original phrase at the 
next downbeat without retriggering it from the keyboard. 

Normally, if you were generating a randomized riff from a 
particular Start Seed value, setting Freeze Loop Length to 0: 
Off would cause the phrase to continue randomizing from 
its current internal position. If you then set the Freeze Loop 
Length

 to some other value than 0: Off, thereby looping the 

phrase, it does not automatically reset the Start Seed until 
you retrigger it from the keyboard (depending on Trigger 
settings). By using Freeze Loop Reset, a change in 
the Freeze Loop Length can additionally reset the internal 
Start Seed

 and therefore generate the same phrase as before, 

allowing instantaneous switching between “randomized” 
and “preset” phrases.

Retrigger Each Time

[+0000, +0001]

Assigns the Retrigger Each Time (Prog 7–1–6a) function.

+0000:

 Off

+0001:

 On

For more information, please see “Retrigger Each Time” on 
page 83.

▼

7–2–2: Menu Command

• 0: Write Program

☞

p.106

• 1: Panel–SW Solo Mode On

☞

p.106

• 2: Exclusive Solo

☞

p.107

• 3: Copy KARMA Module

☞

p.114

• 4: Initialize KARMA Module

☞

p.115

• 5: Copy Scene

☞

p.115

• 6: Swap Scene

☞

p.115

• 7: Capture Random Seed

☞

p.116

For more information, please see “Program: Menu 
Command” on page 106.

Содержание M3








































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды