manualshive.com logo in svg

Korg M3, Руководство по параметрам

На нашем сайте вы можете бесплатно скачать руководство по сборке Keiser M3. Это незаменимый документ для правильной сборки вашего велосипеда и настройки его на максимальный комфорт и эффективность. Скачайте его сейчас с manualshive.com.

Поделиться
Скачать
background image

Sequencer mode

244

GE Select

[0000: Arp Model 01 Up/Dn…2092:

Tempo Env Repeats]

This selects the Module’s GE, from among the 2093 presets.

For more information, please see “GE Select” on page 5.

RTC Model

[Off, On]

This shows the GE’s RTC Model, as specified internally for 
each preset GE.

For more information, please see “RTC Model” on page 5.

Run

[Off, On]

For more information, please see “Run” on page 125.

Solo

[Off, On]

For more information, please see “Solo” on page 125.

Link to DT (Link to Drum Track)

[Off, On]

For more information, please see “Link to DT (Link to Drum 
Track)” on page 126.

Zone:

Specify the range of note data (the key zone) that will 
control each KARMA Module.

Note: In Sequencer mode, MIDI data for the KARMA 
module is transmitted and received on the In (Input 
Channel)

 and Out (Output Channel) (Seq 7–1–1c) of each 

module.

For more information, please see “Zone:” on page 77.

Btm (Key Zone Bottom)

[C–1…G9]

Top (Key Zone Top)

[C–1…G9]

Thru In Z (Thru In Zone)

[Off, On]

Trans (Transpose In Zone)

[–36…+36]

Thru Out Z (Thru Out Zone)

[Off, On]

Trans (Transpose Out Zone)

[–36…+36]

Module Zone Display: 

The key zone settings of each of the four KARMA Modules 
are displayed as a solid blue line.

Notes and messages from the MIDI IN connector within this 
zone will be input to the KARMA Module.

7–1–1c: MIDI I/O

Specifies the MIDI input/output channels for the four 
KARMA Modules used by a Sequencer mode song.

Note: These settings make it possible to use multiple 
KARMA Modules, and simultaneously play multiple tracks 
of different MIDI channels. If you wish to real-time record 
such a performance, use multi-track recording setup (Seq 0–
1–8b: Multi REC).

A, B, C, D (Module A, B, C, D):

In (Input Channel)

[01…16, Tch]

Specifies the MIDI input channel for each KARMA Module.

MIDI data from the keyboard or from MIDI IN that matches 
the specified MIDI channel will be input to the KARMA 
Module. (See the diagram below, “KARMA-MIDI Input/
Output Channel.”

)

Tch:

 Automatically match the MIDI channel (Seq 3–1(2)c) of 

the track selected by Track Select (Seq 0–1–1(2)a).

Tch (Tch Also)

[Off, On]

This specifies whether the MIDI channel of the MIDI track 
selected in Track Select will be used for MIDI input in 
addition to the MIDI channel specified by In (Input 
Channel)

.

Off (unchecked):

 Only the MIDI channel specified by In 

(Input Channel)

 will be used as the MIDI input channel for 

the KARMA Module.

On (checked):

 The MIDI channel specified by In (Input 

Channel)

 and the MIDI channel of the MIDI track selected 

by Track Select will be used as the MIDI input channels for 
the KARMA Module.

If you check Tch Also, you will also be able to control the 
KARMA function from the keyboard (transmitted on the 
MIDI channel of the MIDI track selected by Track Select).

Note: If you’ve selected Master Track for Track Select, the 
MIDI channel of the MIDI track shown in Selected Track 
Info:

 will be used.

Not available if the Module’s In (Input Channel) is Tch 
or the same MIDI channel as the MIDI track selected for 
Track Select

.

Out (Output Channel)

[01…16, Tch]

Specifies the MIDI output channel for each KARMA 
Module.

The MIDI data from each KARMA Module will be 
transmitted on the MIDI output channel specified for that 
KARMA Module, and will be sounded by tracks with 
matching channels. For real-time recording, data will be 

KARMA - MIDI Input / Output Channel

MIDI IN

Track Select = Track01

16ch

01ch

Track 01

Track 02

Track 03

Track 04

Track 05

Track 06

02ch

03ch

04ch

05ch

06ch

01ch

KARMA ON/OFF  = ON

KARMA Module [A] 

In : 01ch

Out : 01ch

KARMA Module [B] 

In : 01ch

Out : 02ch

KARMA Module [C] 

In : 01ch

Out : 03ch

KARMA Module [D] 

In : 16ch

Out : 04ch

Содержание M3








































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для M3

GE MDS SD Series Setup Manual preview
MDS SD Series
Бренд: GE Страницы: 4
Data Translation DT330 Series Getting Started Manual preview
DT330 Series
Бренд: Data Translation Страницы: 60
Paradyne 7995-A2-374 Quick Installation Instructions preview
7995-A2-374
Бренд: Paradyne Страницы: 1
Renesas Compact Emulator M30620T-CPE User Manual preview
Compact Emulator M30620T-CPE
Бренд: Renesas Страницы: 52
Cromemco 32K Bytesaver Instruction Manual preview
32K Bytesaver
Бренд: Cromemco Страницы: 46
Verizon Wireless PC 3220 Owner'S Manual preview
PC 3220
Бренд: Verizon Wireless Страницы: 39
C-Smartlink DMH25 Manual preview
DMH25
Бренд: C-Smartlink Страницы: 7
V-Count Ultima Go Quick Installation Manual preview
Ultima Go
Бренд: V-Count Страницы: 2
Digi DataFire GO! PRO Manual preview
DataFire GO! PRO
Бренд: Digi Страницы: 20
Kontron AdvancedTCA AT8901M User Manual preview
AdvancedTCA AT8901M
Бренд: Kontron Страницы: 76
Link electronics Analog Pulse Generator 812-OP/H Specification Sheet preview
Analog Pulse Generator 812-OP/H
Бренд: Link electronics Страницы: 2
Fibocom H330SS Hardware User Manual preview
H330SS
Бренд: Fibocom Страницы: 39
Mobile Devices MUNIC V6+ Installation Manual preview
MUNIC V6+
Бренд: Mobile Devices Страницы: 12
Hakki Pilke 43 Pro Instructions For Assembly, Operation And Maintenance preview
43 Pro
Бренд: Hakki Pilke Страницы: 48
Epson S5U13719P00C100 User Manual preview
S5U13719P00C100
Бренд: Epson Страницы: 31
Epson S2R72A21 Application Note preview
S2R72A21
Бренд: Epson Страницы: 34
Epson S1D15722 Series Technical Manual preview
S1D15722 Series
Бренд: Epson Страницы: 77
Epson S1C63666 Technical Manual preview
S1C63666
Бренд: Epson Страницы: 171

Бренды по названию

Популярные бренды

Загрузить еще бренды