Korg M3, Руководство по параметрам

Страница: 404 / 647

Media mode
394
Free [00:00..., --:--]
Displays the time that remains on the media inserted in the
USB CD-R/RW drive selected by Media Select.
If a CD-R/RW drive is not connected, or if it contains no
media, or if the inserted media has already been finalized,
this will display --:--.
0–4b: Audio CD Track List
Track [01...99]
Displays the track numbers of the WAVE files arranged in
the audio CD track list. For more information, please see “0–
4a: Track, Total, Free” on page 393.
WAVE File
Displays the names of the WAVE files.
To add a WAVE file, place the cursor at the WAVE file of the
audio CD track that follows the audio CD track you want to
add, and press the Insert button.
To delete an audio CD track, place the cursor at the audio
CD track that you want to delete, and press the Cut button.
Note: When you select a WAVE file (highlighted) and press
the SAMPLING START/STOP switch, the WAVE file will
play back.
Size, Rate, Time
This area displays information on the WAVE files in the
audio CD track list.
Size: Data size (bytes)
Rate: Sampling frequency (Hz)
Time: Time (minutes: seconds)
This information will not be displayed if you used Load
.KCD
etc. to load an audio CD track list, and the WAVE
file is not found in the specified directory. In this case,
use the Cut button to delete that audio CD track, or
check whether the media is connected correctly.
0–4c: Media Select, Command buttons
Media Select [CDD: Name]
Selects the USB CD-R/RW drive that contains the media
that you will use to create an audio CD.
Drives other than a USB CD-R/RW drive cannot be
selected here.
Command buttons:
Insert
Adds an audio CD track to the audio CD track list.
Highlight the WAVE File edit cell following the audio CD
track you want to add, and press the Insert button to open
the dialog box.
Use Media Select to select the media containing the file you
want to add, use the Open button and Up button to navigate
to the appropriate directory, and select the Wave file.
Insert: Adds the selected (highlighted) WAVE file.
Insert All: Adds all WAVE files in the selected directory
whose sampling frequency is 44.1 kHz or 48 kHz. The files
will be added in the order in which they are displayed.
When you execute Insert or Insert All, the WAVE file(s) will
be added, and any subsequent audio CD tracks will be
moved toward the end of the list.
Note: You can play back a WAVE file by selecting
(highlighting) it and pressing the SAMPLING START/STOP
switch.
If you press the Exit button, the dialog box will close, and no
further WAVE files will be added.
You can continue adding as many WAVE files as desired
until you press the Exit button.
Cut
Deletes the audio CD track.
When you place the cursor at WAVE File of the audio CD
track that you want to delete, and press the Cut button, that
audio CD track will be deleted. Any subsequent audio CD
tracks will be moved forward.
Clear
This clears the audio CD track list.
Note: If you want to keep the audio CD track list, use Save
Audio CD Track List
(see page 412) to save the list to the
USB storage device.
▼
0–4: Menu Command
• 0: Swap Track
☞
p.415
• 1: Write to CD
☞
p.415
• 2: Finalize Audio CD
☞
p.416
• 3: Erase CD-RW
☞
p.416
For more information, please see “Media: Menu Command”
on page 398.
Media
Select