manualshive.com logo in svg

Korg M3, Руководство по параметрам

На нашем сайте вы можете бесплатно скачать руководство по сборке Keiser M3. Это незаменимый документ для правильной сборки вашего велосипеда и настройки его на максимальный комфорт и эффективность. Скачайте его сейчас с manualshive.com.

Поделиться
Скачать
background image

KARMA GE guide

536

Phase Specific Parameters

For each of the two Phases, a group of Phase Specific 
Parameters allow control of some performance 
characteristics within each Phase. If settings of the Phase 
Pattern indicate a particular Phase is not being used, the 
Phase Specific Parameters for that Phase will not be 
operable.

Direction

[0, 1]

Selects the basic direction for movement through the Note 
Series in a particular phase. Works in conjunction with the 
parameters in the Index Group, which control how the 
index(es) move through the Note Series. For example, when 
the Direction is 0: Forward, the Index Pattern values are 
added to the index to move it through the Note Series from 
left to right; when Direction is 1: Backward, the Index 
Pattern values are subtracted to move the index through the 
Note Series from right to left.

Not available when “GE Type” (

☞

p.529) = 1: 

Generated-Gated

. If 2: Generated-Drum, the Note 

Series can be applied as pitch bend, discussed 
elsewhere.

Phase Transpose

[–36…+36 (semitones)]

Allows each Phase to be transposed individually.

This applies to each time the Phase occurs in the overall 
Phase Pattern, unlike the Step Transpose Value. Has no 
effect on Direct Indexing effects, which have a separate 
Transpose parameter (see Direct Index Group) or when 
“GE Type”(

☞

p.529) = 2: Generated-Drum. 

Note: The Phase Transpose value is cumulative with the Step 
Transpose value discussed above. For example, if a Step 
Transpose Value is –12, and the Phase Transpose Value for 
the Phase in use during that step is +24, the overall 
transpose would be +12.

Octave Phs. Transpose

[–36…+36]

Allows the Phase’s Transpose value to be quantized to the 
nearest octave, so that when being changed in real-time, 
only transposition by octaves is possible. In this case, the 
value of the parameter changes by semitones, but the actual 
transpose value will only change at certain points within the 
range:

Oct/5th Phs. Transpose

[–36…+36]

Allows the Phase’s Transpose value to be quantized to the 
nearest octave or fifth, so that when being changed in real-
time, only transposition by octaves or fifths is possible. In 
this case, the value of the parameter changes by semitones, 
but the actual transpose value will only change at certain 
points within the range:

Step Transpose Value

[–48…0…+48]

Allows a separate Transpose Value to be used in each step of 
the Phase Pattern (–48…+48 semitones) that affects all notes 
that are generated during that step.

The Step Transpose Value is cumulative with the Phase 
Transpose Value discussed below. For example, if a Step 
Transpose Value is –12, and the Phase Transpose Value for 
the Phase in use during that step is +24, the overall 
transpose would be +12. While this value is not directly 
accessible in each Phase Pattern Step as a GE RT Parameter, 
it may be set as part of a GE and varied by the following two 
GE RT Parameters:

Step Transpose On/Off

[0,  1]

Allows the effect of the Step Transpose Values in each Phase 
Pattern Step to be turned on or off for the entire Phase 
Pattern.

Step Transp. Template

[0…17]

Allows one of 18 different templates for the 16 steps of a 
Phase Pattern to be chosen and applied to the current Phase 
Pattern. These 18 templates provide a wide variety of 
switching between octaves in various orders and amounts, 
and correspond to various settings of the Triton Arpeggiator 
“Octave” and “Octave Motion” parameters (refer to table at 
the bottom). They can be used to simulate Triton Arpeggio 
performances, in addition to other useful applications.

0: Forward

1: Backward

–36 to –31

=

–36

(–3 octaves)

–30 to –19

=

–24

(–2 octaves)

–18 to –7

=

–12

(–1 octave)

–6 to +5

=

0

(no transpose)

+6 to +17

=

+12

(+1 octave)

+18 to +29

=

+24

(+2 octaves)

+30 to +36

=

+36

(+3 octaves)

–36 to –33

=

–36

(–3 octaves)

–32 to –27

=

–29

(–3 o5th)

–26 to –21

=

–24

(–2 octaves)

–20 to –15

=

–17

(–2 o5th)

–14 to –9

=

–12

(–1 octave)

–8 to –3

=

–5

(–1 5th)

–2 to +3

=

0

(no transpose)

+4 to +9

=

+7

(+5th)

+10 to +15

=

+12

(+1 octave)

+16 to +21

=

+19

(+1 5th)

+22 to +27

=

+24

(+2 octaves)

+28 to +33

=

+31

(+2 o5th)

+34 to +36

=

+36

(+3 octaves)

0: Off

1: On

Содержание M3








































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для M3

D-Link ShareCenter Quattro DNS-345 Quick Install Manual preview
ShareCenter Quattro DNS-345
Бренд: D-Link Страницы: 40
D-Link ShareCenter Quattro DNS-345 Datasheet preview
ShareCenter Quattro DNS-345
Бренд: D-Link Страницы: 4
D-Link MYDLINK DNR-322L Datasheet preview
MYDLINK DNR-322L
Бренд: D-Link Страницы: 4
D-Link mydlink DNR-312L Quick Install Manual preview
mydlink DNR-312L
Бренд: D-Link Страницы: 8
D-Link DNS-722-4 Quick Install Manual preview
DNS-722-4
Бренд: D-Link Страницы: 16
D-Link DNS-722-4 User Manual preview
DNS-722-4
Бренд: D-Link Страницы: 88
Cabletron Systems Netlink FRX8000 Installation And Setup Manual preview
Netlink FRX8000
Бренд: Cabletron Systems Страницы: 94
Cabletron Systems MMAC-Plus 9E423-24 Reference Manual preview
MMAC-Plus 9E423-24
Бренд: Cabletron Systems Страницы: 10
Cabletron Systems MMAC-Plus 9A128-01 Management Manual preview
MMAC-Plus 9A128-01
Бренд: Cabletron Systems Страницы: 22
Cabletron Systems Spectrum EMM-E6 Addendum Manual preview
Spectrum EMM-E6
Бренд: Cabletron Systems Страницы: 2
Cabletron Systems DLM6C-AA Overview And Setup Manual preview
DLM6C-AA
Бренд: Cabletron Systems Страницы: 54
Cabletron Systems Cabletron BRIM-F6 User Manual preview
Cabletron BRIM-F6
Бренд: Cabletron Systems Страницы: 43
Cabletron Systems Netlink FRX4000 Maintenance Manual preview
Netlink FRX4000
Бренд: Cabletron Systems Страницы: 60
Cabletron Systems 9E132-15 Appendix preview
9E132-15
Бренд: Cabletron Systems Страницы: 8
Cabletron Systems TRXI-22 Addendum preview
TRXI-22
Бренд: Cabletron Systems Страницы: 4
A10 Thunder Series Manual preview
Thunder Series
Бренд: A10 Страницы: 52
H3C S5120V3-EI Series Manual preview
S5120V3-EI Series
Бренд: H3C Страницы: 54
Ublox LENA-R8 Series System Integration Manual preview
LENA-R8 Series
Бренд: Ublox Страницы: 116

Бренды по названию

Популярные бренды

Загрузить еще бренды