manualshive.com logo in svg

Korg M3, Руководство по параметрам

На нашем сайте вы можете бесплатно скачать руководство по сборке Keiser M3. Это незаменимый документ для правильной сборки вашего велосипеда и настройки его на максимальный комфорт и эффективность. Скачайте его сейчас с manualshive.com.

Поделиться
Скачать
background image

Global mode

384

2. Release the note before the bar reaches the right edge; 

i.e., release the note at the point where you want the 
maximum aftertouch effect to occur.

3. Press the Done button.

If the adjustment could not be made correctly, an error 
message will appear. Perform the adjustment once again.

If you want to restore the original setting, perform the 
following adjustment.

1. Slowly depress any note until the bar indicator moves 

all the way to the right edge.

2. Press the Done button.

Note: This sensitivity setting cannot be adjusted for each 
individual key.

Update System Software

Here you can update the M3 system.

You can download the latest system file onto your computer 
from the Korg website (http://www.korg.com). For details, 
please see the Korg website.

Before you begin the system update, you should back 
up your important data on external USB storage media.

1. To the M3’s USB A connector, connect the USB storage 

device (e.g., USB flash memory) that contains the sys-
tem file.

Note: For details on how to copy the system file to your USB 
storage device, please see the explanation on the download 
page of the Korg website.

Only the device containing the system file should be 
connected to the USB A connector. Disconnect all other 
devices.

2. Access the Global P0: Basic Setup page.

3. Select “Update System Software” to open the dialog 

box.

4. Press the OK button to execute the update.

A dialog box will ask you for confirmation. Press the OK 
button to begin updating the system software.

Note: If an error message of “File/Path not found” appears, 
press the OK button and proceed again from step 3.

While the system is being updated, do not touch the 
M3’ switches, and never turn off the power. If the 
power is accidentally turned off while the system is 
being loaded, the M3 may become inoperable. If this 
occurs, please contact your local Korg distributor.

5. When the update has been completed, a dialog box 

with the following message will appear.

The system update has now been installed. To complete the 
process, you must now restart the M3. Please turn the power 
off, and then on again.

6. Power-off the M3. Wait approximately ten seconds, and 

then turn the power on again.

When you turn the power off and then on again, wait 
approximately ten seconds before you turn on the 
power.

The system version number is shown in the lower center of 
the opening screen. Verify that it is correct.

Dump:

Dump Program

Dump Combination

Dump Drum Kit

Dump Global Setting

Dump Sequencer

Dump Drum Track Pattern

Dump Formant Motion

These commands allow the M3 internal data to be 
transmitted to another M3, MIDI data filter, or computer in 
the form of MIDI System Exclusive data.

Select the desired command (please see the following table), 
and a dialog box will appear. Then, select the bank or timbre 
etc. of the data to be dumped, and press the OK button.

Sending SysEx data dumps

Do not touch the M3’s switches or turn off the power 
while data is being transmitted.

Sending a data dump

1. Connect the M3 to the device that will receive the data 

dump.

If you want to transmit the data to a computer that is able to 
receive MIDI exclusive messages, connect the M3’s USB B 
connector to your computer’s USB connector. (See page 614)

If you want to transmit the data to another M3 or to a MIDI 
data filer, connect the M3’s MIDI OUT connector to the 
MIDI IN connector of the receiving device. (See page 614)

2. Select Global P1: MIDI page.

3. The following illustration shows the dialog box that 

will appear when Dump Program is selected.

If To dump one bank select Bank, or to dump one program 
select Single.

Dump Program

Programs of all banks, programs of one bank, 
one program

Dump Combination

Combinations of all banks, combinations of 
one bank, one combination

Dump Drum Kit

All drum kits, one drum kit

Dump Global setting

Global settings (except for the Drum Kits of 
Global mode)

Dump Sequencer

All song data and cue list data

Dump Drum Track 
Pattern

All drum track user pattern, one drum track 
user pattern

Dump Formant 
Motion

All formant motion data, one formant motion 
data

Содержание M3








































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для M3

Rolls HR11C Owner'S Manual preview
HR11C
Бренд: Rolls Страницы: 2
EK-Quantum Momentum ROG Strix X570-E D-RGB User Manual preview
Momentum ROG Strix X570-E D-RGB
Бренд: EK-Quantum Страницы: 10
TDK InvenSense RoboKit1 Hardware Reference Manual preview
InvenSense RoboKit1
Бренд: TDK Страницы: 13
Xantech CC12 Installation Instructions preview
CC12
Бренд: Xantech Страницы: 4
Pressalit Care Indivo RK1010 User And Maintenance Manual preview
Indivo RK1010
Бренд: Pressalit Care Страницы: 31
Ubiquiti PowerBeam PBE-5AC-400-ISO Quick Start Manual preview
PowerBeam PBE-5AC-400-ISO
Бренд: Ubiquiti Страницы: 23
ekwb EK-FC980 GTX Classy Installation And Mounting Manual preview
EK-FC980 GTX Classy
Бренд: ekwb Страницы: 2
ZALMAN CNPS 4X User Manual preview
CNPS 4X
Бренд: ZALMAN Страницы: 16
TEC Control WiDiCast User Manual preview
WiDiCast
Бренд: TEC Control Страницы: 4
NEC EP-753304DU-R User Manual preview
EP-753304DU-R
Бренд: NEC Страницы: 26
Matrix Switch Corporation MSC-CP32X1E Product Manual preview
MSC-CP32X1E
Бренд: Matrix Switch Corporation Страницы: 48
ADTRAN NetVanta 4430 Quick Start preview
NetVanta 4430
Бренд: ADTRAN Страницы: 4
Matrix Vision mvHYPERION-32R16 Technical Manual preview
mvHYPERION-32R16
Бренд: Matrix Vision Страницы: 148
Allied Telesis AT-TN109-A Specifications preview
AT-TN109-A
Бренд: Allied Telesis Страницы: 2
VIA Technologies ARTiGO-A1200 Quick Manual preview
ARTiGO-A1200
Бренд: VIA Technologies Страницы: 2
TRENDnet TEW-221PC User Manual preview
TEW-221PC
Бренд: TRENDnet Страницы: 56
Kontron KISS Stor Slim Quick Installation Manual preview
KISS Stor Slim
Бренд: Kontron Страницы: 4
LAWO A_madi4 User Manual preview
A_madi4
Бренд: LAWO Страницы: 68

Бренды по названию

Популярные бренды

Загрузить еще бренды