manualshive.com logo in svg

Korg M3, Руководство по параметрам

На нашем сайте вы можете бесплатно скачать руководство по сборке Keiser M3. Это незаменимый документ для правильной сборки вашего велосипеда и настройки его на максимальный комфорт и эффективность. Скачайте его сейчас с manualshive.com.

Поделиться
Скачать
background image

Combination mode

188

Detune BPM Adjust

Detune BPM Adjust

 is available on the Pitch tab of the 

Timbre Parameters page.

This command changes a loop’s tempo by changing the 
Timbre’s Detune parameter. The sample data itself is not 
altered. Since this alters the pitch of the loop along with the 
tempo, it’s generally suited only to un-pitched percussive 
loops.

Note: Using Detune BPM Adjust will over-write any 
previous Detune settings.

1. Go to the Pitch tab of the Timbre Parameters page.

2. Select the Detune parameter for the desired Timbre.

Detune BPM Adjust

 is available only when the Detune 

parameter has been selected. Otherwise, the menu selection 
will be grayed out.

3. Select “Detune BPM Adjust” to open the dialog box.

4. In From, specify the loop’s original BPM value.

Ignore any previous changes from using Detune BPM 
adjust.

5. In To, specify the desired BPM value. 

The appropriate Detune value will be calculated 
automatically from these two values.

For example, if you set From to 60 bpm and To to 120 bpm, 
Detune

 will be set to +1200 (one octave up).

6. To execute the Detune BPM Adjust command, press the 

OK button. To exit without changing the Detune value, 
press the Cancel button.

Note: Since this command does not affect the sample data 
itself, and always over-writes the previous Detune amount, 
using it repeatedly has no cumulative effect. 

Copy KARMA Module

This command copies the settings of the KARMA Module 
used by a specified program, combination, or song.

1. Select “Copy KARMA Module” to open the dialog box.

2. In From, select the copy source mode, bank, and 

number.

You can press a BANK SELECT I-A–U-G switch to select 
the bank.

3. If you selected a combination or song as the copy-

source, select the module from which you want to copy.

4. As appropriate for the content that you want to copy, 

turn “GE RTP Control & Scenes” On (checked). (see 
“Settings copied by Copy KARMA Module”)

5. If you want to copy performance realtime parameters, 

Dynamic MIDI, and front panel settings, turn “Perf. 
RTP & Panel Settings” On (checked). (see “Settings 
copied by Copy KARMA Module”)

6. If you also want to copy the note and velocity settings 

of pads 1–8, turn “Pads” On (checked).

7. Use the To field to select the copy-destination KARMA 

module.

8. Press the OK button to execute the Copy KARMA 

Module command, or press the Cancel button if you 
decide to cancel.

Settings copied by “Copy KARMA Module”

When copying from a program

If GE RTP Control & Scenes and Perf. RTP & Panel 
Settings

 are Off (checked), the following content is copied.

• The GE selected by the copy-source KARMA module.

• Link to DT setting.

• Settings of the KARMA module parameters (7–1: 

KARMA1– Trigger, 7–1: KARMA1– Control).

• 7–2: KARMA2– GE RTP MIN, MAX, and VALUE 

settings.

If you turn “GE RTP Control & Scenes” On (checked)

In addition to the content copied when “GE RTP Control & 
Scenes” is Off (unchecked), the following content is copied.

• 7–2: KARMA2– GE RTP ASSIGN and POL. settings.

• The scene selected in the master buffer (A), the KARMA 

Slider and KARMA Switch settings of each scene (0: 
Play– KARMA RTC and 0: Play– Control Surface 
“KARMA” settings).

• 7–2: KARMA2– Names controller name settings.

If you turn “Perf. RTP & Panel Setting” On (checked)

In addition to the content copied when “Perf. RTP & Panel 
Settings” is Off (unchecked), the following content is copied.

• Tempo setting.

• Time Signature setting.

• KARMA ON/OFF switch setting.

• KARMA LATCH switch setting.

• 7–1: KARMA1– Drum Track Control page settings.

• 7–2: KARMA2– Perf RTP page settings.

• 7–2: KARMA2– Dynamic MIDI page settings.

When copying from a combination or song

If GE RTP Control & Scenes and Perf. RTP & Panel 
Settings

 are Off (unchecked) when you copy from a 

combination or song, the following content is copied.

• The GE selected for the copy-destination KARMA 

module (including the GE realtime parameters).

• Link to DT setting of the copy-source KARMA module.

• KARMA module parameters (7–2: KARMA2– Trigger, 

7–2: KARMA2– Control).

• 7–3: KARMA3– GE RTP MIN, MAX, and VALUE 

settings.

If you turn “GE RTP Control & Scenes” On (checked)

In addition to the content copied when GE RTP Control & 
Scenes

 is Off (unchecked), the following content is copied.

• 7–3: KARMA3– GE RTP page ASSIGN and POL. 

settings.

• The KARMA CONTROLS slider and KARMA SWITCH 

settings of each scene in the copy-source buffer, and the 
currently selected scene.

Содержание M3








































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для M3

Keithley 7707 User Manual preview
7707
Бренд: Keithley Страницы: 59
XIA Pixie-4 Express Software Manual preview
Pixie-4 Express
Бренд: XIA Страницы: 17
Clavister NetWall W20A Getting Started Manual preview
NetWall W20A
Бренд: Clavister Страницы: 89
AYRSTONE AyrMesh IndoorAP Instructions preview
AyrMesh IndoorAP
Бренд: AYRSTONE Страницы: 2
B&B Electronics PCMCIA 232PCC2 Owner'S Manual preview
PCMCIA 232PCC2
Бренд: B&B Electronics Страницы: 24
Rimage CDPR3 User Manual preview
CDPR3
Бренд: Rimage Страницы: 30
LevelOne CamCon FCS-4000 User Manual preview
CamCon FCS-4000
Бренд: LevelOne Страницы: 94
HP ProCurve Radio Port 210 Installation And Getting Started Manual preview
ProCurve Radio Port 210
Бренд: HP Страницы: 36
HP StorageWorks T5521A Specifications preview
StorageWorks T5521A
Бренд: HP Страницы: 20
HP iSCSI User Manual preview
iSCSI
Бренд: HP Страницы: 15
HP MSR954 Series Installation Manual preview
MSR954 Series
Бренд: HP Страницы: 45
HP ProCurve Networking J8451A Quick Start Manual preview
ProCurve Networking J8451A
Бренд: HP Страницы: 2
HP ProCurve Radio Port 210 Installation Manual preview
ProCurve Radio Port 210
Бренд: HP Страницы: 24
HP HSR6602-G Installation Manual preview
HSR6602-G
Бренд: HP Страницы: 107
HP StorageWorks X9320 Administrator'S Manual preview
StorageWorks X9320
Бренд: HP Страницы: 152
HP StoreEasy 3000 Administrator'S Manual preview
StoreEasy 3000
Бренд: HP Страницы: 102
HP IBRIX X9000 Installation Manual preview
IBRIX X9000
Бренд: HP Страницы: 151
HP M852x User Manual preview
M852x
Бренд: HP Страницы: 76

Бренды по названию

Популярные бренды

Загрузить еще бренды