Kikusui PWX1500H, Руководство пользователя

Страница: 84 / 131

84
PWX
Series Operation
With models whose output is less than 650 V, you can connect up to two units in series. You
cannot perform master-slave series operation. The total of the output voltages of the two
units is applied to the load. The voltage setting accuracy is the same as the accuracy of an
individual unit.
Features of the PWX series during series operation
The features of the PWX series during series operation are as follows:
Voltage display and current display
The voltage and current are displayed on unit 1 and unit 2. To calculate the total output volt-
age, add the voltages of unit 1 and unit 2.
p.28
You can switch the display so that it shows power. The power is displayed on unit 1 and unit
2.
External control
Chapter 3
This is available.
External monitoring
p.75
• External monitoring of the output voltage (V MON)
You can monitor the output voltage of each unit.
To calculate the total output voltage, add the monitor values of the master unit and the
slave unit.
WARNING
The PWX750HF and PWX1500H cannot be used in series operation. If you do, the output will
exceed the isolation voltage resulting in a dangerous condition.
See
Lit
Lit
Unit 1
Unit 2
Example of the panel display
during series operation
(The output current is 28 A.)
See
WARNING
During monitoring, be careful of shorts and electric shocks. When monitoring the out-
put voltage or output current during master-slave series operation, the electric poten-
tial of the commons of the master unit’s monitor signal and the slave unit’s monitor
signal are different.
See