Kikusui PWX1500H, Руководство пользователя

Страница: 22 / 131

22
PWX
Connecting to the Output Terminals
2
Place the bottom half of the OUTPUT terminal cover underneath the load
cables connected to the output terminals.
3
Align the tabs of the top half of the OUTPUT terminal cover with those of
the bottom half.
Align the tabs of the OUTPUT terminal cover according to the load cable diameter.
4
Push the OUTPUT terminal cover against the rear panel, and then use
the PWX screws to fix the cover in place.
Make sure that the screws are securely fastened.
Memo
The top and bottom
halves of the OUTPUT
terminal cover have
different shapes.
Remove the screws, and then
line up the half of the cover.
Top half of the cove
Align the protrusion of
the top half of the cover
with the top section
of the protrusion of the
bottom half.
Bottom half of the cover
For thick load cables
Cover hole diameter:
10 mm to 18 mm
Cover hole diameter:
Up to 10 mm
For thin load cables
Top half of the cover
Align the protrusion of
the top half of the cover
with the middle section
of the protrusion of the
bottom half of the cover.
Bottom half of the cover
Middle
section
Top section
After you have lined up the top and bottom halves
of the cover, use the screws to fix the cover in place.
Screws (M3)