Kikusui PWX1500H, Руководство пользователя

Страница: 102 / 131

102
PWX
PWX750LF/ PWX750MLF/ PWX750MHF/ PWX750HF
PWX750LF PWX750MLF PWX750MHF PWX750HF
Accesso-
ries OUTPUT terminal cover 1 pc.
INPUT terminal cover set ─
Power cord 1 pc.
Output terminal bolt set M8 bolts: 2 sets (Bolt, nut, spring
washer, and washer for each bolt) M5 bolts: 2 sets (Bolt, nut, spring
washer, and washer for each bolt)
Chassis connection wire 1 pc.
J1 connector plug kit 1 set (housing × 1, connector × 1, plug × 1, cable strain relief × 1,
clip × 2, and two kinds of screws × 2)
Packing list 1 copy
Quick reference Japanese: 1 copy, English: 1 copy
Safety precautions 1 copy
CD-ROM 1 disc
1 Factory option.
2 Does not apply to specially ordered or modified PWXs.
3 Limited to products that have the CE mark on their panels. Not be in compliance with EMC limits unless the ferrite
core is attached on the cable for connection of J1 connector.
4 This is a Class A equipment. The PWX is intended for use in an industrial environment. This product may cause in-
terference if used in residential areas. Such use must be avoided unless the user takes special measures to reduce
electromagnetic emissions to prevent interference to the reception of radio and television broadcasts.
5 This is a Group 1 equipment. The PWX does not generate and/or use intentionally radio-frequency energy, in the from
of electromagnetic radiation, inductive and/or capacitive coupling, for the treatment of material or inspection/analysis
purpose.
6 This is a Class I equipment. Be sure to ground the PWX's protective conductor terminal. The safety of this product is
only guaranteed when the product is properly grounded.
7 Pollution is addition of foreign matter (solid, liquid or gaseous) that may produce a reduction of dielectric strength or
surface resistivity. Pollution Degree 2 assumes that only non-conductive pollution will occur except for an occasional
temporary conductivity caused by condensation.