Kikusui PWX1500H, Руководство пользователя

Страница: 43 / 131

PWX
43
CONFIG Settings
Basic Functions
2
CF00, and CF40 are used to execute operations. CF30 to CF36, CF50, and CF51 are used
to display the status of the PWX series. You cannot set the values of any of these CONFIG
parameters.
The SET key blinks when you have selected a CONFIG parameter whose setting you must
confirm by pressing SET (CF00, and CF40).
LAN
5
CF44 Manual IP address setting (3)
▼
■ B or C
CF45 Manual IP address setting (4)
▼
■ B or C
CF46 IP address subnet mask prefix setting
▼
■ B or C
CF47 SCPI-RAW protocol TCP port number
▼
■ B or C
USB CF50 VID (vendor ID) display
▼
─
CF51 PID (product ID) display ▼
─
RS232C CF52 RS232C baud rate parameter ▼ B
1 You can only specify this parameter when the PWX series is being used as a master unit.
2 You can only specify this parameter only when the variable internal resistance feature (factory option) is
installed.
3 You can only specify this parameter only when the PWX series is being used as a slave unit.
4 This parameter is affected only when the LAN interface settings are reset (CF40: dEF).
5 This parameter is displayed only when the LAN interface is in use (CF20: on).
Display
switching Parameter
number
Setting or display description Effect Note
CONFIG key
CONFIG key
*
CONFIG key
CONFIG key
Displayed only when the PWX series
is being used as a slave unit
CONFIG key
CONFIG key
Displayed only when the
LAN interface is in use
CF00
CF01
CF19*
CF20
CF21
CF25
VOLTAGE knob
Used to select
the value or the
parameter to
display.
CONFIG key
Used to select
the parameter
number.
CURRENT knob
Used to select
the parameter
number.
Measured value display
System settings
Interface settings
. . .
. . .
LAN settings
(Display)
LAN settings
(Parameter)
．．
．
CF30
CF31
CF36
．．
．
CF40
CF41
CF47
CURRENT knob
CURRENT knob
CURRENT knob
CURRENT knob
USB/RS232C
settings
CF50
CF51
CF52
CURRENT knob