Kikusui PWX1500H, Руководство пользователя

Страница: 49 / 131

PWX
49
CONFIG Settings
Basic Functions
2
CF15 Voltage setting limit
p. 37
Set whether to limit the set output voltage so that its value does not exceed the set overvolt-
age protection (approximately 95 % of the OVP trip point) and is not lower than the set under-
voltage limit. When the voltage setting limit is set to “oFF,” if you set the voltage setting limit to
“on” when the set OVP is lower than the set voltage, the voltage value will be maintained, and
the set OVP will be changed to 105 % of the voltage value. In addition, the set UVL will be
changed to match the voltage value. The parameter will also be changed if the output is on.
This is set to “on” when the panel settings are reset (CF00) and when a preset memory entry
is recalled.
You can only specify this parameter when the PWX series is being used as a master unit
.
CF16 Panel display brightness setting
Adjusts the panel display brightness. The larger the number, the brighter the display.
Even if you specify the same number, the brightness may be different between individual
products.
The brightness is not proportional to the setting.
CF17 Communication monitor timer setting
p. 41
Sets the interval for monitoring SCPI command communication.
The communication monitoring function operates regardless of whether the product is in
remote or local (panel control) mode.
When using local mode (panel control), be sure to specify oFF.
CF18
I
nternal resistance setting (factory option)
p. 118
Sets the internal resistance (Rint). The internal resistance that you can specify varies
depending on the model. For the internal resistance range, see
“Variable range” on page 119.
You can display and set this parameter only when the variable internal resistance feature
(factory option) is installed.
See
Value Parameter description
oFF The setting is not limited.
on The setting is limited (factory default setting).
Memo
When multiple units are
used side-by-side, if the
brightness of the panel
display is different
between units, you can
adjust it.
Value Parameter description
1 to 7 Screen brightness (factory default setting: 7).
See
Value Parameter description
oFF Communication monitor timer is set to off (factory default setting).
1 to 3000 1 s, 3 s, 10 s, 30 s, 100 s, 300 s, 1000 s, 3000 s
See
Value Parameter description
oFF Variable internal resistance feature is not used (factory default setting).
Rint (min) to Rint (max) Rint (min) Ω to Rint (max) Ω