Keysight Technologies N5221A Скачать руководство пользователя

Страница: 13 / 368

Keysight N5221A/22A Service Guide 1-3

Safety and Regulatory Information
General Safety Considerations

General Safety Considerations

Safety Earth Ground

Before Applying Power

This is a Safety Class I product (provided with a protective earthing

ground incorporated in the power cord). The mains plug shall only

be inserted in a socket outlet provided with a protective earth

contact. Any interruption of the protective conductor, inside or

outside of the instrument, will make the instrument dangerous.

Intentional interruption is prohibited.

Always use the three-prong AC power cord supplied with this product.

Failure to ensure adequate grounding by not using this cord may cause

product damage.

If this product is not used as specified, the protection provided by

the equipment could be impaired. This product must be used in a

normal condition (in which all means for protection are intact) only.

If an instrument handle is damaged, you should replace it

immediately. Damaged handles can break while you are moving or

lifting the instrument and cause personal injury or damage to the

instrument.

This instrument has autoranging line voltage input. Be sure the supply

voltage is within the specified range.

Supply voltages which oscillate between the two normal input

ranges of the autoranging line voltage input will damage the power

supply. In rare cases, this damage has become a user safety

concern. If unstable power levels are expected, the analyzer input

power must be buffered by a line conditioner.

This product is designed for use in Installation Category II and Pollution

Degree 2 per IEC 61010-1:2001 and 664 respectively.

Содержание N5221A

















































































































































































































































































































































































Результаты поиска

Содержание N5221A

Отзывы:

Похожие инструкции для N5221A

Бренды по названию

Популярные бренды

Keysight Technologies N5221A, Руководство по обслуживанию

Результаты поиска

Содержание N5221A

Отзывы:

Похожие инструкции для N5221A

Бренды по названию

Популярные бренды