KEPCO KLP 10-150-2, Руководство пользователя

Страница: 17 / 92

KLP 070312
1-5
GENERAL (ENVIRONMENTAL) SPECIFICATIONS
Temperature operating -20 to +50 deg C Rated load. Derate at -25W per °C from
50°C to 70°C.
storage -40 to +85 deg C
Cooling 3 internal d-c fans exhaust to the rear
Humidity 0 to 95% RH non-condensing
Shock 20g, /- 50% half sine non-operating
Vibration 5 -10 Hz 10mm double amplitude 3-axes, non-operating
10-55 Hz 2g 3-axes, non-operating
Altitude sea level to 10000 ft. 0-3,000 ft: 100%, linear derating to 70%
of power at 10,000ft.
PHYSICAL CHARACTERISTICS
Dimensions English 1.735”H x 19"W x 17.5"D Depth excluding connectors and termi-
nal blocks (see Figure 1-3).
metric 44.45 x 482.6 x 443.7 mm
Weight English 15 lbs
metric 6.82kg
Source power connector IEC 320-C19 appliance inlet 250 Va-c, 16A (VDE);
125V a-c, 20A (UL)
Load connections 10-36V models Nickel plated copper busbar with inte-
gral threaded stud (1/4-20-1/2in.)
Provision for safety covers.
75-600V models Shock-safe Euroblock, single conduc-
tor size: 20-10AWG (0,5 - 5,0 mm2)
Analog programming port. 15 pin D-sub
Digital programming ports primary Standard GPIB connector IEEE 488.2 (GPIB)
secondary 9 pin D-sub RS 232 (standard Models only)
secondary RJ 45 LAN (E-Series Models Only)
Feedback/Control Input 5 position low profile Euroblocks
PROGRAMMING CHARACTERISTICS - LOCAL
Local control rotary encoders Panel mounted.
Local control resolution Coarse ~100 LSB/step Depress control for Fine resolution
Fine 1 LSB/step
Setting range 0-100% of rating KLP will automatically adjust limit to
maintain 1200 W maximum,
Power up settings voltage defaults to zero See PAR. 3.2.9.3.
current defaults to min. value (See Table 1-2)
Protection Limits Overvoltage 20-120% of Emax Programmable; accessed via front
panel protect switch or SCPI command
over digital bus.
Overcurrent 72-120% of Imax
TABLE 1-3. KLP SPECIFICATIONS (Continued)
SPECIFICATION RATING/DESCRIPTION CONDITION/COMMENT