KEPCO KLP 10-150-1.2K, Руководство пользователя

Страница: 39 / 84

KLP-HV 031308
2-15/(2-16 Blank)
2.8.2 RS 232 CONNECTIONS [-1200 MODELS ONLY]
Communications between KLP, considered data terminal equipment (DTE), and data communi-
cations equipment (DCE), e.g. a modem, requires a patch cable, or one with a pin-for-pin rela-
tionship between terminating connectors. A null modem cable is necessary for nearly all
applications, with the exception of those in which the RXD and TXD line transposition is accom-
plished via external hardware (e.g. older Apple MAC computers with D-sub serial port). See
Table 2-4 for RS 232 port pin assignments. Connect the cable to the KLP at the RS 232 port
located on the rear panel (See Figure 2-2). Refer to PAR. 3.2.10 to change the default baud rate
(38400) from the front panel.
2.8.3 LAN CONNECTIONS [-1.2K MODELS ONLY]
Connect the KLP to the LAN via the RJ 45 LAN port located at the rear panel (See Figure 2-2).
Refer to Table 2-5 for LAN port pin assignments. Refer to PAR 3.2.12 to configure the LAN inter-
face from the front panel. Some configuration can also be done through the web interface (see
PAR. 3.3.6.3). Refer to the KLP Developer’s Guide for the associated SCPI commands