KEPCO KLP 10-150-1.2K, Руководство пользователя

Страница: 66 / 84

3-26
KLP031308
ture. These settings are cleared when a calibration is performed. Click SAVE/RECALL to open
the Save/Recall Dialog Box (Figure 3-9).
FIGURE 3-9. SAVE/RECALL DIALOG BOX
NOTE: When the SAVE/RECALL tab is initially selected, parameters for all locations appear
as empty even when there are values stored from previous sessions. Click the Pre-
view button first to avoid overwriting existing data.
• To view currently stored settings: Enter a location (1 to 40) in the box between Save @
and Preview buttons, then click Preview button.
• To change currently stored settings: Enter a location (1 to 40) in the box between Save @
and Preview buttons, then click Preview button. Modify the settings and click Save @ button
to save the modified settings.
• To save the active settings: Enter the desired location (1 to 40) in the LOCATION box and
click Save State button to save the active settings. Only the parameters shown in Figure 3-7
can be saved.
• To save user-determined settings: Enter location (1 to 40) in the box between Save @ and
Preview buttons. Enter desired values for Voltage, Current, Overvoltage Protection and
Overcurrent protection. Select whether the output is to be on or off, then click Save @ button
to save the settings
• To Recall settings: Enter the desired location in the LOCATION field and click Recall State
to set previously stored settings as the active settings.
If a virtual model setting is changed, and a stored setting is outside the range established by the
new virtual model, the data set is not loaded; although there is no indication on the web page,
the Status Display of the power supply will flash E221, "Settings conflict.