manualshive.com logo in svg

KEPCO KLP 10-150-1.2K, Руководство пользователя

Пользовательский мануал для KEPCO KLP 10-150-1.2K доступен бесплатно для загрузки с нашего сайта. В этом руководстве содержится вся необходимая информация о продукте. Скачать его можно с {вебсайта}. Не упустите возможность облегчить использование этого продукта!

Поделиться
Скачать
background image

KLP031308

3-19

3.3.2

ADDITIONAL FUNCTIONS NOT AVAILABLE FROM THE FRONT PANEL

Some additional functions are described in the KLP Developer’s Guide that are not available
from the front panel:

• Storage of User-programmed Active Settings - 40 memory locations are available to

store and recall active settings of the power supply. The active setting include voltage,
current, protection limits, and output state (ON or OFF) This feature may be also
accessed using the web interface (-1.2K models only, see PAR. 3.3.6.5.3).

• User-determined output Sequences - Up to 100 memory locations are available for pro-

gramming the KLP output using multiple command sequences that can be initiated by a
single LIST command (see KLP Developer’s Guide). This feature may be also accessed
using the web interface (-1.2K models only, see PAR. 3.3.6.5.5).

• External Triggering - If external trigger mode is selected, grounding the EXT_TRG line

(J2 pin 14 to pin 9, 11, 13 or 15) allows SCPI commands to change the output of the
power supply. Refer to the KLP Developer’s Guide for details on the use of triggering.

Kepco provides three instrument drivers, IVI-COM, LabView G and VXI 

plug&play

 which sim-

plify programming of the KLP power supply via the digital interfaces. These drivers are
described in the KLP Developer’s Guide and can be downloaded from the Kepco web site at:
http://www.kepcopower.com/drivers/

3.3.3

REMOTE PROGRAMMING USING THE IVI-COM INSTRUMENT DRIVER 

The IVI-COM driver for KLP is available for download at the Kepco web site www.kepco-
power.com/drivers. Examples are provided in the KLP Developer’s Guide.

3.3.4

REMOTE PROGRAMMING USING THE LABVIEW G INSTRUMENT DRIVER 

The LabView G driver for KLP, available for download at the Kepco web site www.kepco-
power.com/drivers, includes a LabView G demonstration program that greatly simplifies pro-
gramming the unit with a Windows™ compatible computer. After running a setup, a “soft” front
panel is visible on the computer monitor that allows all the functionality of the local front panel.
The LabView G soft front panel controls are explained in the KLP Developer’s Guide.

3.3.5

REMOTE PROGRAMMING USING THE VXI 

plug&play

 INSTRUMENT DRIVER 

The VXI 

plug&play

 driver for KLP, available for download at the Kepco web site www.kepco-

power.com, includes a demonstration program that greatly simplifies programming the unit via
the GPIB or RS 232 ports with a Windows™ compatible computer. After running a setup, a
“soft” front panel is visible on the computer monitor that allows all the functionality of the local
front panel. The VXI 

plug&play

 soft front panel controls are explained in the KLP Developer’s

Guide.

3.3.6

REMOTE PROGRAMMING USING THE WEB INTERFACE [-1.2K MODELS ONLY]

Remote programming of the KLP via the LAN port can be accomplished using a standard web
browser connected to the internet. 

The factory default LAN settings of the KLP are DCHP on, AUTOIP on. When the power supply
is turned on, it tries to find a DCHP server and get an IP address while the LAN indicator blinks
rapidly. If the server is not found after 10 seconds, the unit will use AUTOIP to get an address. If
an IP address is found, the LAN indicator stays on without blinking. If an IP address is not found,

Содержание KLP 10-150-1.2K





















































































Отзывы:

Нет отзывов

Похожие инструкции для KLP 10-150-1.2K

Lambda pmn Instruction Manual preview
pmn
Бренд: Lambda Страницы: 25
Gallagher M350 Instructions Manual preview
M350
Бренд: Gallagher Страницы: 96
ITech IT6121B User Manual preview
IT6121B
Бренд: ITech Страницы: 46
Array electronic 367 Series User Manual preview
367 Series
Бренд: Array electronic Страницы: 73
Mountz K150F-A Operating Instructions Manual preview
K150F-A
Бренд: Mountz Страницы: 8
Kett KL-200 Instructions For Use Manual preview
KL-200
Бренд: Kett Страницы: 6
S.E.F.A SUBLIMAX 1812 Instruction Manual preview
SUBLIMAX 1812
Бренд: S.E.F.A Страницы: 26
Cantek J168LH Operation Manual preview
J168LH
Бренд: Cantek Страницы: 29
Delta Elektronika SM 120-50 Manual preview
SM 120-50
Бренд: Delta Elektronika Страницы: 21
LIVARNO LUX 306794 Operation And Safety Notes preview
306794
Бренд: LIVARNO LUX Страницы: 100
TDK Belleta iPB Series Product Brief preview
Belleta iPB Series
Бренд: TDK Страницы: 2
Ultra Products X-Finity Series Specification Sheet preview
X-Finity Series
Бренд: Ultra Products Страницы: 1
mxr Mini Iso-Brick M239 User Manual preview
Mini Iso-Brick M239
Бренд: mxr Страницы: 5
Mean Well ELG-150-C Series Manual preview
ELG-150-C Series
Бренд: Mean Well Страницы: 12
Kärcher GSH 2 Plus Manual preview
GSH 2 Plus
Бренд: Kärcher Страницы: 284
Napa Carlyle DTW38 User Manual preview
Carlyle DTW38
Бренд: Napa Страницы: 20
EVGA BRONZE 450BA User Manual preview
BRONZE 450BA
Бренд: EVGA Страницы: 10
Gude 55558 Translation Of The Original Instructions preview
55558
Бренд: Gude Страницы: 72

Бренды по названию

Популярные бренды

Загрузить еще бренды