manualshive.com logo in svg

Keithley SourceMeter 2430, Руководство по обслуживанию

Поделиться
Скачать
Keithley SourceMeter 2430 Скачать руководство пользователя страница 63

Troubleshooting         4-3

Power-on self-test 

During the power-on sequence, the Model 2430 will perform a checksum test on its EPROM 

and test its RAM. If one of these tests fails, the instrument will lock up. 

Front panel tests

There are three front panel tests: one to test the functionality of the front panel keys and two 

to test the display. In the event of a test failure, refer to Display board checks for details on trou-
bleshooting the display board. 

KEYS test 

The KEYS test lets you check the functionality of each front panel key. Perform the following 

steps to run the KEYS test. 

1.

Display the MAIN MENU by pressing the MENU key. 

2.

Select TEST, and press ENTER to display the SELF-TEST MENU. 

3.

Select DISPLAY-TESTS, and press ENTER to display the following menu: 

FRONT PANEL TESTS

KEYS  DISPLAY-PATTERNS  CHAR-SET 

4.

Select KEYS, and press ENTER to start the test. When a key is pressed, the label name 
for that key will be displayed to indicate that it is functioning properly. When the key is 
released, the message “No keys pressed” is displayed. 

5.

Pressing EXIT tests the EXIT key. However, the second consecutive press of EXIT 
aborts the test and returns the instrument to the SELF-TEST MENU. Continue pressing 
EXIT to back out of the menu structure. 

DISPLAY PATTERNS test 

The display test lets you verify that each pixel and annunciator in the vacuum fluorescent dis-

play is working properly. Perform the following steps to run the display test: 

1.

Display the MAIN MENU by pressing the MENU key. 

2.

Select TEST, and press ENTER to display the SELF-TEST MENU. 

3.

Select DISPLAY-TESTS, and press ENTER to display the following menu: 

FRONT PANEL TESTS

KEYS  DISPLAY-PATTERNS  CHAR-SET

4.

Select DISPLAY-PATTERNS, and press ENTER to start the display test. There are five 
parts to the display test. Each time a front panel key (except EXIT) is pressed, the next 
part of the test sequence is selected. The five parts of the test sequence are as follows:
• Checkerboard pattern (alternate pixels on) and all annunciators.
• Checkerboard pattern and the annunciators that are on during normal operation.
• Horizontal lines (pixels) of the first digit are sequenced.
• Vertical lines (pixels) of the first digit are sequenced.

Содержание SourceMeter 2430














































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды