Series 3700A System Switch/Multimeter Reference Manual
Section 11: TSP command reference
3700AS-901-01 Rev. D/June 2018
11-437
Details
This command sends a command string to the remote instrument. A termination is added to the
command string when it is sent to the remote instrument (
tspnet.termination()
). You can also
specify a format string, which causes the command to wait for a response from the remote
instrument. The Series 3700A decodes the response message according to the format specified in
the format string and returns the message as return values from the function (see
tspnet.read()
for format specifiers).
When this command is sent to a TSP-enabled instrument, the Series 3700A suspends operation until
a timeout error is generated or until the instrument responds. The TSP prompt from the remote
instrument is read and discarded. The Series 3700A places any remotely generated errors into its
error queue. When the optional format string is not specified, this command is equivalent to
tspnet.write()
, except that a termination is automatically added to the end of the command.
Example 1
tspnet.execute(instrumentID, "runScript()")
Command the remote device to run a script named
runScript
.
Example 2
tspnet.timeout = 5
id_instr = tspnet.connect("192.0.2.23", 23, "*rst\r\n")
tspnet.termination(id_instr, tspnet.TERM_CRLF)
tspnet.execute(id_instr, "*idn?")
print("tspnet.execute returns:", tspnet.read(id_instr))
Print the
*idn?
string from the remote device.
Also see
(on page 11-434)
(on page 11-438)
(on page 11-445)
tspnet.idn()
This function retrieves the response of the remote device to
*IDN?
.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
No
Usage
idnString
= tspnet.idn(
connectionID
)
idnString
The returned
*IDN?
string
connectionID
The connection ID returned from
tspnet.connect()
Details
This function retrieves the response of the remote device to
*IDN?
.
