Keithley 3700A Series, Справочное руководство

Страница: 398 / 936

Series 3700A System Switch/Multimeter Reference Manual Section 11: TSP command reference
3700AS-901-01 Rev. D/June 2018 11-19
bufferVar.cachemode
This attribute enables or disables the reading buffer cache (on or off).
Type TSP-Link accessible Affected by Where saved Default value
Attribute (RW) Yes Clearing the buffer cache
Instrument reset
Recall setup Not saved 1 (enabled)
Usage
cacheMode = bufferVar .cachemode
bufferVar .cachemode = cacheMode
cacheMode
The reading buffer cache mode; set to one of the following:
▪
0
: Cache mode disabled (off)
▪
1
: Cache mode enabled (on)
bufferVar
The reading buffer
Details
Assigning a value to this attribute enables or disables the reading buffer cache. When enabled, the
reading buffer cache improves access speed to reading buffer data.
If you run successive operations that overwrite reading buffer data, the reading buffer may return
stale cache data. To avoid this, make sure that you include commands that automatically invalidate
the cache as needed (for example, explicit calls to the
bufferVar .clearcache()
function) or
disable the cache using this attribute (
bufferVar .cachemode
).
Example
buffer1.cachemode = 1
Enables reading buffer cache.
Also see
bufferVar.clearcache() (on page 11-22)
Reading buffers (on page 6-7, on page 6-1)
bufferVar.capacity
This attribute contains the number of readings a buffer can store.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (R) Yes Instrument reset
Recall setup Create configuration script
Save setup Not applicable
Usage
bufferCapacity = bufferVar .capacity
bufferCapacity
The maximum number of readings the buffer can store
bufferVar
The reading buffer
Details
This read-only attribute reads the number of readings that can be stored in the buffer.