Keithley 3700A Series, Справочное руководство, Страница: 69 / 936

Section 3: Instrument description Series 3700A System Switch/Multimeter Reference Manual
3-10 3700AS-901-01 Rev. D/June 2018
The following table contains descriptions of the main menu options and cross-references to related
information. To access a menu option, press the
MENU key, turn the navigation wheel to move the
cursor to select an item, and press the navigation wheel .
Main menu options
Menu selection Description For more information, see:
SCRIPT Saves and recalls user's scripts Manage scripts (on page 10-3)
- CREATE-CONFIG Automatically generates a user script that is saved to a
script with a name that you define Create a configuration script (on page 3-
35)
- LOAD Loads scripts into nonvolatile memory
- SAVE Saves scripts
SETUP Saves and recalls user and factory setup options Saved setups (on page 3-30)
- SAVE Saves user setup options
- RECALL Recalls user setup options
- POWERON Sets the configuration used during startup
- RESET Resets the instrument, restores factory default settings,
removes channel patterns, reading buffers, and DMM
configurations, and opens channels and backplane relays
GPIB Configures the GPIB interface options Remote communications interfaces (on
page 2-6)
- ADDRESS Configures the address for the GPIB interface
- ENABLE Enables and disables the GPIB interface
LAN Configures the local area network (LAN) LAN concepts and settings (on page A-1)
- STATUS Displays LAN connection status
- CONFIG Configures the LAN IP address and gateway
- APPLY Applies changes made using the LAN CONFIG menu
- RESET Restores the default settings
- ENABLE Enables and disables the LAN interface
TSPLINK*
Configures the instrument in a TSP-Link
®
network
TSP-Link system expansion interface (on
page 10-53, on page 10-52)
- NODE Selects the instrument node identifier
- RESET Resets the TSP-Link network
UPGRADE Upgrades the firmware from a USB flash drive Upgrading the firmware (on page 7-5)
EMULATION Sets the model number that is reported when the model
number is queried
- 3706A Report the model as a 3706A
- 3706 Report the model as a 3706
CHANNEL Select the type of close and open duration Working with channels (on page 5-13)
- RULE Select the connection rule when opening and closing
channels
- SEQUENTIAL Determines if channels are closed sequentially
DISPLAY Accesses display functions Front panel tests (on page 7-3)
- TEST Runs the display tests
DIGIO** Controls digital outputs Digital I/O (on page 2-28)
- DIGIO-OUTPUT Selects the digital I/O values
- WRITE-PROTECT Write-protects specific digital I/O lines
BEEPER Controls the key beeps General operation
- KEYCLICK Enable or disable key clicks
- BEEPER
Enable or disable the beeper and key clicks
UNIT-INFO Displays the system information General operation
- FIRMWARE Displays the version of firmware installed
- SERIAL# Displays the serial number of the instrument
- MEMORY-USAGE Displays memory usage in percentage
- CAL Displays the last calibration date and number of times the
instrument has been adjusted
* TSPLINK is not available on the Models 2604A, 2614A, and 2634A.
** DIGIO is not available on the Models 2604A, 2614A, and 2634A.