Section 9: Introduction to TSP operation
Series 3700A System Switch/Multimeter Reference Manual
9-8
3700AS-901-01 Rev. D/June 2018
After downloading the above script, type
file_io_test()
to execute the script:
file_io_test()
The following output is returned after executing the
file_io_test()
script:
contents of myfile1 are:
Using io write to myfile1 to io output
11/27/07 07:57:23
file handle to write to myfile1
while myfile3 is output file for io
contents of myfile2 are:
file handle to write to myfile2
while myfile1 is output file for io
Using io write to myfile2 to io output
11/27/07 07:57:23
contents of myfile3 are:
file handle to write to myfile3
while myfile2 is output file for io
Using io write to myfile3 to io output
11/27/07 07:57:23
The following script will open a file called
myfiletest
three times. The first time it is opened is for
writing. Note that opening an existing file for writing deletes any existing information in the file. The
second time it is opened is for appending more data to the existing data in the file. Opening a file for
append will not delete any existing data; it only adds data to the end of the existing file contents. The
third time the file is opened is for reading the entire contents of the file (existing data and appended
data).
