KAESER KOMPRESSOREN SIGMA CONTROL SMART MOBILAIR M82 Скачать руководство пользователя страница 196 | Manualshive

Страница: 196 / 418

KAESER KOMPRESSOREN SIGMA CONTROL SMART MOBILAIR M82 Скачать руководство пользователя страница 196

■ Check the belt again after a further 2 operating hours.
■ A belt that has been replaced may not be used again.

Old belts should be disposed of in accordance with the latest environmental regulations.

10.15.6.4 Putting in operation:

1. Replace the belt guard.
2. Turn on the «battery isolating switch».
3. Close the doors.

A belt that has been replaced may not be used again.

Old belts should be disposed of in accordance with the latest environmental regulations.

10.15.7 Option oe

Draining liquid accumulation within the machine

The so-called "closed floor pan" contributes to the protection of the environment by preventing a

contamination of the soil in the event of leaking operating fluids.

Liquid accumulations within the machine's body can also cause corrosion or electrical faults.

Liquid accumulations must be removed as quickly as possible to avoid any faults of the machine.

For draining the liquid, maintenance openings have been added to the floor panel of the machine

which are closed with bungs.

In order to clean the machine, see chapter 4.8.10 for the location of the service openings.

Material Oil receptacle

Cleaning cloths

Precondition The machine is switched off.

The machine is standing level.
The machine is secured against moving.
The machine is fully vented, the pressure gauge reads 0 psig.
The machine has cooled down.
All compressed air consumers are disconnected and the air outlet valves are open.

➤ Open all doors.

Checking the machine interior for liquid accumulations:

1. Check the machine interior for liquid accumulations.

If liquid is present in the floor pan: Drain the liquid.

2. Close the doors.

Draining the liquid:

1. Place a receptacle underneath the service opening(s).

10 Maintenance

10.15 Maintenance for Optional Items

182

Operator Manual Portable Rotary Screw Compressor
MOBILAIR M82 SIGMA CONTROL SMART

No.: 901783 08 USE

«
...
194
195
196
197
198
...
»

Содержание SIGMA CONTROL SMART MOBILAIR M82



































































































































































































































































































































































































































Отзывы:

Нет отзывов