KAESER KOMPRESSOREN SIGMA CONTROL SMART MOBILAIR M82 Скачать руководство пользователя страница 267 | Manualshive

Страница: 267 / 418

KAESER KOMPRESSOREN SIGMA CONTROL SMART MOBILAIR M82 Скачать руководство пользователя страница 267

➤ Attach the following notice on the instrument panel to inform of the decommissioning measures

taken.

Attention!
1. The machine is decommissioned.
2. It is filled with preserving oil.
3. For recommissioning:

■ Take measures for recommissioning the compressor after a long period of storage.
■ Recommission according to service manual.
Date / signature

Tab. 108 Text for the long-term decommissioned and storage information notice

➤ Store in a dry place with constant temperatures.

12.2 Transport

Precondition Machine switched off and locked off

(«battery isolating switch» off)
The machine is fully vented, the pressure gauge reads 0 psig.
Machine is cooled down.
All compressed air consumers are disconnected.
All connecting lines and hoses disconnected and removed.
Any loose or movable parts that may fall when transporting are removed or secured.

12.2.1 Safety

Allow transportation only by personnel trained in safely dealing with motor vehicles and the

transporting of goods.

1.

There is danger of being run over or crushed by an overturning vehicle.

Death or serious injury can result from being crushed or run-over by a machine being towed.
➤ Riding on the machine while it is being towed is strictly forbidden.

2. Make sure the danger area is clear of personnel.

12.2.2 Transporting the machine as trailer

➤ Note the instructions in the separate document "Chassis Operating Manual" regarding the topic

"transport of the machine as trailer".

12.2.3 Transporting the machine by crane

Precondition The machine is standing firm and level.

The machine is switched off.
The machine has cooled down.

12 Decommissioning, Storage and Transport

12.2 Transport

No.: 901783 08 USE

Operator Manual Portable Rotary Screw Compressor
MOBILAIR M82 SIGMA CONTROL SMART

253

«
...
265
266
267
268
269
...
»

Содержание SIGMA CONTROL SMART MOBILAIR M82



































































































































































































































































































































































































































Отзывы:

Нет отзывов