manualshive.com logo in svg

KAESER KOMPRESSOREN SIGMA CONTROL SMART MOBILAIR M82, Руководство пользователя, Страница: 160 / 418

Поделиться
Скачать
KAESER KOMPRESSOREN SIGMA CONTROL SMART MOBILAIR M82 Скачать руководство пользователя страница 160

1. Open the left-hand door.
2. Unscrew the housing.
3. Remove the oil separator element and the sealing ring.
4. Clean the contact surfaces of enclosure and cover with a lint-free cloth and remove any adher‐

ing oil and grease residue.

5. Insert a new oil separator element and new sealing ring.
6. Manually screw the cover on.
7. Turn on the «battery disconnect switch».
8. Close the door.

Dispose of the old oil separator element, sealing ring and contaminated resources according

to applicable environment protection regulations.

10.5  Servicing the components of the emission after-treatment system

➤ Perform maintenance tasks according to the schedule in chapter 10.3.4.1.

Check the housing of the diesel particulate filter:

➤ Check the housing of the diesel particulate filter for proper seating and damage.

The housing is damaged: Please contact KAESER SERVICE.

Check flange connection between exhaust manifold and diesel particulate filter:

➤ Check flange connection between exhaust manifold and diesel particulate filter; if required,

tighten the screw connection.
The flange connection is damaged: Contact KAESER SERVICE or KUBOTA.

10.6  Compressor Maintenance

➤ Perform maintenance tasks according to the schedule in chapter 10.3.4.1.

10.6.1  Check the cooling oil level

The oil level is checked at the oil separator tank filling port. Oil must be visible in the port when the

filler plug is removed.

Material Wrench

Cleaning cloths

Precondition The machine is shut down.

The machine is standing level.
The machine is fully vented, the pressure gauge reads 0 psig.
All compressed air consumers are disconnected and the air outlet valves are open.

10 Maintenance

10.5 Servicing the components of the emission after-treatment system

146

Operator Manual    Portable Rotary Screw Compressor  
MOBILAIR M82  SIGMA CONTROL SMART

No.: 901783 08 USE

Содержание SIGMA CONTROL SMART MOBILAIR M82



































































































































































































































































































































































































































Отзывы:

Нет отзывов