manualshive.com logo in svg

KAESER KOMPRESSOREN SIGMA CONTROL SMART MOBILAIR M82, Руководство пользователя, Страница: 53 / 418

Поделиться
Скачать
KAESER KOMPRESSOREN SIGMA CONTROL SMART MOBILAIR M82 Скачать руководство пользователя страница 53

Bear in mind:
■ In IT networks, the total length of power cables may not exceed 250 m (DIN VDE 0100, Part

728 / IEC 60364-5-551).

■ Use at least H07RN-F cables to DIN VDE 0282 Part 4 (IEC 60245-4 / HD 22.4) as non-fixed

extension cables.

3.9.4  Do not exceed the maximum supply system load

➤ When operating the generator, do not exceed the maximum supply system load due to con‐

nected consumers.

Bear in mind:
■ The power consumption values of simultaneous consumers are added.
■ The maximum continuous power loading on the generator by the connected consumers is limi‐

ted by the safety cut-out.

3.9.5  Perform regular generator inspections

To ensure a safe operation, the machine must be subjected to regular inspections.
Daily inspection prior to activating the device by authorised operating personnel:
➤ Insulation monitor function check.
Annual inspection by trained and authorised electrician:
➤ Inspect the generator and generator control cubicle for mechanical damages.
➤ Inspect the protective conductor.
➤ Measure the dielectric resistance.
➤ Measure the substitute leakage current.
➤ Test the generator functionality.
➤ Test the proper functioning of the generator fan and clean, if required.
➤ Clean the cooling air openings.
➤ Check and tighten the screw connections at the generator and the generator control cubicle.
➤ Check covers and power socket caps for damage and good sealing.
➤ Check the completeness of labeling and warning labels.

3.10  Emergencies

3.10.1  Correct actions in the event of a fire

Suitable extinguishing media:
■ Foam
■ carbon dioxide
■ Sand or earth

Unsuitable extinguishing agents:
■ Strong jet of water

1. Keep calm.
2. Give the alarm.

3

Safety and Responsibility

3.10 Emergencies

No.: 901783 08 USE

Operator Manual    Portable Rotary Screw Compressor  
MOBILAIR M82  SIGMA CONTROL SMART

39

Содержание SIGMA CONTROL SMART MOBILAIR M82



































































































































































































































































































































































































































Отзывы:

Нет отзывов