KAESER KOMPRESSOREN SIGMA CONTROL SMART MOBILAIR M82 Скачать руководство пользователя страница 49

Страница: 49 / 418

Location Sign

Meaning

500

Warning!
Drawbar load and ground clearance!
Danger of fishtailing, incorrect towing vehicle load, damage to the machine

caused by rollover or contact with the ground.
➤ Always line up the drawbar so that the machine is level with the ground.

520

Warning!
Always use safety chains!
Chains hold trailer if connection fails.

→ You must:
■ Cross chains underneath coupling.
■ Allow stack for trailer to turn.
■ Attach chain hooks securely to tow vehicle frame.

540

(1)

Warning!
Machine without breaks!
Serious injury or death may result from uncontrolled movement when the

unit is not safeguarded by chocks.
➤ Always use chocks before uncoupling and generally when the unit is

not in motion.

➤ Do not move unit manually.

541

(1)

Warning!
Missing chock!
Serious injury or death may result from uncontrolled movement when the

unit is not safeguarded by chocks.
➤ Always fix chock for proper storage.
➤ Always replace missing chock immediately.

550

Danger!
Uncontrolled tensioning of the breakaway cable!
Danger of accident caused by travelling with the trailer parking brake ap‐

plied.
➤ Never attach the breakaway cable to anything but the tow coupling to

prevent unintentional tensioning when under way.

➤ Make sure the breakaway cable is not under tension.
➤ Ensure that the breakaway cable is fed through the cable guide.

1222

(2)

Danger!
Fresh air filter.
Death or serious injury can result from breathing CO, CO

and toxic gas.

➤ Draw in only surrounding air of breathing quality.

(1)

Only portable machines

(2)

Only machines with option dc,

(3)

Only machines with option ob

Safety and Responsibility

3.7

Safety signs

No.: 901783 08 USE

Operator Manual Portable Rotary Screw Compressor
MOBILAIR M82 SIGMA CONTROL SMART

Содержание SIGMA CONTROL SMART MOBILAIR M82



































































































































































































































































































































































































































Результаты поиска

Содержание SIGMA CONTROL SMART MOBILAIR M82

Отзывы:

KAESER KOMPRESSOREN SIGMA CONTROL SMART MOBILAIR M82, Руководство пользователя, Страница: 49 / 418

Результаты поиска

Содержание SIGMA CONTROL SMART MOBILAIR M82

Отзывы: