KAESER KOMPRESSOREN SIGMA CONTROL SMART MOBILAIR M82 Скачать руководство пользователя страница 16

Страница: 16 / 418

Signal word Meaning

Consequences of ignoring the warning

CAUTION Warns of a potentially dangerous sit‐

uation

May result in a moderate physical injury

Tab. 1 Danger levels and their definition (personal injury)

Some warning notes may precede a chapter. They apply to the entire chapter including all subsec‐

tions.
Example:

The type and source of the imminent danger is shown here!

The possible consequences of ignoring a warning are shown here.

The word "DANGER" indicates that death or severe injury can very likely result from ignoring

the warning.
➤ The measures required to protect yourself from danger are shown here.

Warning notes referring to a subsection or the subsequent action are integrated into the procedure

and numbered as an action.
Example:
1.

The type and source of the imminent danger is shown here!

The possible consequences of ignoring a warning are shown here.

The word "WARNING" indicates that death or severe injury may result from ignoring the warn‐

ing.
➤ The measures required to protect yourself from danger are shown here.

2. Always read and comply with warning instructions.

1.4.2 Potential damage warnings

Contrary to the warnings shown above, damage warnings do not indicate a potential personal in‐

jury.

Damage warnings have only one danger level, identified with this signal word:

Signal word Meaning

Consequences of non-compliance

NOTE

Warns of a potentially dangerous situation

Damage to property is possible

Tab. 2 Danger levels and their definition (damage to property)

Example:

The type and source of the imminent danger is shown here!

Potential effects when ignoring the warning are indicated here.
➤ The protective measures against the damages are shown here.

➤ Carefully read and fully comply with warnings against damages.

Regarding this Document

1.4

Symbols and labels

Operator Manual Portable Rotary Screw Compressor
MOBILAIR M82 SIGMA CONTROL SMART

No.: 901783 08 USE

Содержание SIGMA CONTROL SMART MOBILAIR M82



































































































































































































































































































































































































































Результаты поиска

Содержание SIGMA CONTROL SMART MOBILAIR M82

Отзывы:

KAESER KOMPRESSOREN SIGMA CONTROL SMART MOBILAIR M82, Руководство пользователя, Страница: 16 / 418

Результаты поиска

Содержание SIGMA CONTROL SMART MOBILAIR M82

Отзывы: