KAESER KOMPRESSOREN SIGMA CONTROL SMART MOBILAIR M82 Скачать руководство пользователя страница 109 | Manualshive

Страница: 109 / 418

KAESER KOMPRESSOREN SIGMA CONTROL SMART MOBILAIR M82 Скачать руководство пользователя страница 109

1.

Machine damage caused by strong water jet!

Direct water jets can damage or even destroy sensitive components.
➤ Do not directly focus a strong water jet towards sensitive components.
➤ Work carefully.

2. Carefully clean the machine with the high-pressure cleaner.

Water has accumulated in the closed floor pan.
➤ Drain the water.

Catch the liquid and dispose in accordance with applicable environmental regulations.

Further information See chapter 10.15.7 for information to the draining of liquids within the machine.

8.6 Refuelling the machine

In order to avoid accidents caused by igniting fuel, special caution must be exercised when filling

the fuel tank.

Fuel constitutes a fire hazard!

Overflowing or spilled fuel can ignite upon contact with hot engine parts, open flames or

sparks, resulting in serious burns.
➤ Only refuel the machine after switching it off and allowing it to cool down.
➤ Never refuel the machine in the vicinity of open flames or sparks.
➤ Do not allow fuel to spill or overflow.
➤ Do not smoke.

➤ Follow all instructions carefully.

8.6.1 Use the correct type of fuel

The use of incorrect fuels in modern diesel engines may – in the most serious cases – result in a

total loss of the injection system and engine.
In the worst case scenario, irreparable damage occurs when a modern diesel engine is started with

petrol or premium-grade petrol in the fuel tank. Because these fuels lack the special lubricating

properties of diesel fuel, it is primarily the precision components in the injection system that are de‐

stroyed. Secondary damage may occur to the drive engine.

Example: Machine with diesel

engine

Measures

■ Fuel tanks are filled with

petrol or premium-grade

fuel.

■ Error is noticed.
■ Drive engine is not started.

➤ Do not start the engine under any circumstances.
➤ Arrange for the incorrect fuel to be drained / pumped out

from the tanks.

➤ Arrange for the fuel tanks to be cleaned.
➤ Fill the tanks with diesel fuel.

8

Operation

8.6

Refuelling the machine

No.: 901783 08 USE

Operator Manual Portable Rotary Screw Compressor
MOBILAIR M82 SIGMA CONTROL SMART

95

«
...
107
108
109
110
111
...
»

Содержание SIGMA CONTROL SMART MOBILAIR M82



































































































































































































































































































































































































































Отзывы:

Нет отзывов