KAESER KOMPRESSOREN SIGMA CONTROL SMART MOBILAIR M82 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 418

KAESER KOMPRESSOREN SIGMA CONTROL SMART MOBILAIR M82 Скачать руководство пользователя страница 42

➤ Do not install any non-approved additional components.
➤ Do not make any changes to the machine that will increase its weight beyond the permissible

limit and/or endanger its safe use or transportation.

➤ Obtain written approval by the manufacturer prior to any technical modification or expansion of

the machine or controller.

3.5.2 Safe machine operation

The following is information supporting you in the safe handling of the machine during individual

product life phases.

Personal protective equipment

When working on the machine you may be exposed to dangers that can result in accidents with

severe adverse health effects.
➤ Wear protective clothing as necessary.

Suitable protective clothing (examples):
■ Safety work wear
■ Protective gloves
■ Safety boots
■ Eye protection
■ Ear protection

3.5.2.1 Transport

The weight and size of the machine require safety measures during its transport to prevent acci‐

dents.
➤ Allow transport only by personnel trained in safely dealing with motor vehicles and the trans‐

port of goods.

➤ Ensure that no persons are on the machine when transporting.

Transport as trailer

Non-compliance with the basic rules for a safe trailer operation may cause severe accidents during

machine transport.
➤ The maximum permissible load for the towing vehicle coupling and the maximum coupling load

given for the machine must not be exceeded.

➤ Avoid causing a shift in the centre of gravity by an excessive or incorrectly distributed load.
➤ Do not tow in such a way as to impose excessive stress on the machine or chassis.
➤ Adjust towing speed to accommodate ground and weather conditions. This applies particularly

to unpaved roads and when taking curves.

➤ The towbar must be parallel with the ground otherwise towing instability can develop, resulting

in damage to the machine and/or towing vehicle.

➤ Before moving the machine, make sure any security devices (e.g. anti-theft chain) are re‐

leased.

Transport as trailer on public roads

➤ Do not tow machines without service brake on public roads.

3

Safety and Responsibility

3.5

Dangers

28

Operator Manual Portable Rotary Screw Compressor
MOBILAIR M82 SIGMA CONTROL SMART

No.: 901783 08 USE

«
...
40
41
42
43
44
...
»

Содержание SIGMA CONTROL SMART MOBILAIR M82



































































































































































































































































































































































































































Отзывы:

Нет отзывов