KAESER KOMPRESSOREN SIGMA CONTROL SMART MOBILAIR M82 Скачать руководство пользователя страница 76

Страница: 76 / 418

The GSM/GPS unit comprises:
■ GSM modem
■ GPS receiver

Please observe all information from the manufacturer regarding functionality, operation and

service!

Further information Dealer/manufacturer and GSM/GPS unit model information can be found in chapter 2.9.5.

4.8.8 Transport options

See the separate document "Chassis Operating Manual" for information on the design of the

individual chassis.

4.8.9 Frame design options for stationary machines

4.8.9.1 Option rw; rx

Frame types of stationary machines

Option

Designation

Characteristics

Skid

■ Frame designed as skid
■ Use as stationary machine
■ Mounted on truck/trailer platform

Frame

■ The mounting assembly is designed as a frame.
■ Use as stationary machine
■ Mounted on truck/trailer platform

Tab. 65 Stationary machines

Further information See chapter 13.3 for the dimensional drawings of machines with stationary frame designs.

4.8.10 Option oe

Closed floor pan option

The machine is fitted with a closed floor pan catching liquids in the event of leaks. Thus, direct con‐

tamination of the floor is prevented.

The closed floor pan:
■ Cannot catch all liquids contained in the machine, but is intended only to capture small

leaks in the vicinity of endangered components.

■ Is equipped with service openings which are closed with bungs. These openings must be

tightly re-closed after performing any cleaning work.

When other components are removed from the closed floor pan (for example the sheet metal

cover), they must be properly re-sealed prior to installation.

Design and Function

4.8

Options

Operator Manual Portable Rotary Screw Compressor
MOBILAIR M82 SIGMA CONTROL SMART

No.: 901783 08 USE

Содержание SIGMA CONTROL SMART MOBILAIR M82



































































































































































































































































































































































































































Результаты поиска

Содержание SIGMA CONTROL SMART MOBILAIR M82

Отзывы:

KAESER KOMPRESSOREN SIGMA CONTROL SMART MOBILAIR M82, Руководство пользователя, Страница: 76 / 418

Результаты поиска

Содержание SIGMA CONTROL SMART MOBILAIR M82

Отзывы: