manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Руководство по настройке

Поделиться
Скачать
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Скачать руководство пользователя страница 98

■

Use to specify the name of the backup local address pool from which the router
allocates addresses for the domain that you are configuring, if the primary local
address pool is fully allocated.

■

The backup local address pool takes effect only if you configured a valid primary
local address pool.

■

If the primary local address pool has been fully allocated, and if you did not
configure a backup local address pool, the request is denied. This behavior is the
same as what existed in previous JUNOSe releases.

■

If the authentication server returns the backup local address pool name in the
RADIUS-Access-Accept message, this value overrides the backup address pool
configured using the 

backup-address-pool-name

 command.

■

You can specify a local address pool to be the backup address pool for some
users and the primary pool for other users.

■

You can also use the same local address pool as the backup address pool for
subscribers using different primary address pools.

■

The backup pool name is a character string up to 16 characters long.

■

Example

host1(config)#

aaa domain-map westford.com

host1(config-domain-map)#

backup-address-pool-name backup_poolB

■

Use the 

no

 version to remove the backup address pool name.

■

See backup-address-pool-name.

ip address-pool

■

Use to specify the addressing scheme: dhcp, local, or none.

■

The addressing scheme none returns a special indicator to AAA that enables the
remote PPP client to assign its own address.

■

Example

host1(config)#

ip address-pool dhcp

■

Use the 

no

 version to specify the default, local.

■

See ip address-pool

ip local alias

■

Use to create an alias for an existing local address pool. The IP address is allocated
from the pool specified by the alias rather than from the pool specified in the IP
address request.

■

An alias name may contain up to 16 characters.

■

You can configure a maximum of 32 aliases per virtual router.

■

A local address pool can have multiple aliases.

■

You can set the name of the alias to match the name of a local address pool;
however, the two names used in the alias cannot be the same.

58

■

Configuring Local Address Servers

JUNOSe 11.1.x Broadband Access Configuration Guide

Содержание JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды