manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Руководство по настройке

Поделиться
Скачать
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Скачать руководство пользователя страница 436

When you configure any of these AVP types for relay in an L2TP tunnel-switched
network, the router preserves the value of an incoming AVP of this type when packets
are switched between the inbound LNS session and the outbound LAC session.

Configuration Tasks

To configure and use an L2TP tunnel switch profile in an L2TP tunnel-switched
network:

1.

Ensure that L2TP tunnel switching is enabled on the router.

2.

Configure the L2TP tunnel switch profile.

3.

Apply the L2TP tunnel switch profile to the tunnel in one of the following ways:

■

To apply a named tunnel switch profile through an AAA domain map, use
the 

switch-profile

 command from Domain Map Tunnel Configuration mode.

For details, see “Applying L2TP Tunnel Switch Profiles by Using AAA Domain
Maps” on page 397

.

■

To apply a named tunnel switch profile through an AAA tunnel group, use
the 

switch-profile

 command from Tunnel Group Tunnel Configuration mode.

For details, see “Applying L2TP Tunnel Switch Profiles by Using AAA Tunnel
Groups” on page 398

.

■

To apply a named tunnel switch profile through RADIUS, include the
Tunnel-Switch-Profile RADIUS attribute (VSA 26-91) in RADIUS Access-Accept
messages. For details, see “Applying L2TP Tunnel Switch Profiles by Using
RADIUS” on page 399

.

■

To apply a default tunnel switch profile to a virtual router, use the 

aaa  tunnel

switch-profile

 command from Global Configuration mode. For details, see

“Applying Default L2TP Tunnel Switch Profiles” on page 399

.

The following sections describe how to perform each of these tasks.

Enabling Tunnel Switching on the Router

To enable L2TP tunnel switching on the router, use the 

l2tp tunnel-switching

command. By default, tunnel switching is disabled.

■

To enable L2TP tunnel switching:

host1(config)#

l2tp tunnel-switching

For more information, see “Enabling Tunnel Switching” on page 384.

Configuring L2TP Tunnel Switch Profiles

To configure an L2TP tunnel switch profile:

1.

Create the L2TP tunnel switch profile and assign it a name. The 

l2tp

switch-profile

 command accesses L2TP Tunnel Switch Profile Configuration

mode.

396

■

Configuring L2TP Tunnel Switch Profiles

JUNOSe 11.1.x Broadband Access Configuration Guide

Содержание JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды