manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Руководство по настройке

Поделиться
Скачать
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Скачать руководство пользователя страница 672

■

Use the 

no

 version to prevent the DHCP local server from supplying IP addresses

from the specified pool.

■

See ip dhcp-local pool

ip inactivity-timer

■

Use to configure the inactivity timer value. A dynamically created subscriber
interface is deleted if it is inactive for a period longer than the inactivity timer
value.

■

The timer value can be in the range 1–65335 minutes.

■

A timer value of 0 specifies that dynamically created subscriber interfaces are
never deleted by the inactivity timer.

■

Example

host1(config-if)#

ip inactivity-timer 100

■

Use the 

no

 version to restore the default, in which inactivity timer feature is

disabled.

■

See ip inactivity-timer

ip source-prefix

■

Use to configure a subscriber interface or a primary IP interface enabled for
dynamic creation of subscriber interfaces to demultiplex traffic with the specified
source address.

■

You can issue this command from either Interface Configuration mode or
Subinterface Configuration mode.

■

Example

host1(config-if)#

ip source-prefix 10.10.2.0 255.255.255.0

■

Use the 

no

 version to remove the association between the interface and the

specified IP source address and mask.

■

See ip source-prefix

ip unnumbered

■

Use to configure an unnumbered IP interface.

■

This command enables IP processing on an interface without assigning an explicit
IP address to the interface.

■

You must specify an interface location, which is the identifier of another interface
on which the router has an assigned IP address. This interface cannot be another
unnumbered interface.

■

Examples

host1(config-if)#

ip unnumbered fastEthernet 3/0

host1(config-if)#

ip unnumbered loopback 10

632

■

Configuring Dynamic Subscriber Interfaces

JUNOSe 11.1.x Broadband Access Configuration Guide

Содержание JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды