manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Руководство по настройке

Поделиться
Скачать
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Скачать руководство пользователя страница 384

2.

Assign a router ID IP address, such as that for a loopback interface, to the virtual
router. This address must be reachable by the L2TP peer.

host1:west(config)#

ip router-id 10.10.45.3

CAUTION:

You must explicitly assign a router ID to a virtual router rather than using

a dynamically assigned router ID. A fixed ID is required because every time the ID
changes, L2TP must disconnect all existing tunnels and sessions that use the old ID.
If you use a dynamically assigned router ID, the value can change without warning,
leading to failure of all L2TP tunnels and sessions. Also, the router could dynamically
assign a router ID that is not reachable by the L2TP peer, causing a complete failure
of L2TP. You must set the router ID even if you specified a source address in the
domain map or a local address in the host profile.

3.

When configuring the router as a LAC, configure the router or virtual router for
Broadband Remote Access Server (B-RAS).

NOTE:

If you are using shared tunnel-server ports, you must configure the shared

tunnel-server ports before you configure Layer 2 Tunneling Protocol (L2TP) network
server (LNS) support. You use the 

tunnel-server

 command in Global Configuration

mode to specify the physical location of the shared tunnel-server port that you want
to configure.

See 

JUNOSe Physical Layer Configuration Guide

 for additional information about the

tunnel-server

 command and shared tunnel-server ports.

Related Topics

virtual-router

■

■

ip router-id

Modifying L2TP LAC Default Settings for Managing Destinations, Tunnels, and
Sessions

Configuring an E Series router for B-RAS enables the router to operate as an LAC
with default settings. You can modify the default settings as follows:

■

Enable the verification of data integrity via UDP.

■

Specify the time period for which the router maintains dynamic destinations,
tunnels, or sessions after termination.

NOTE:

The previous two operations also apply to an LNS, however there is no default

configuration that enables the LNS.

344

■

Modifying L2TP LAC Default Settings for Managing Destinations, Tunnels, and Sessions

JUNOSe 11.1.x Broadband Access Configuration Guide

Содержание JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды