manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Руководство по настройке

Поделиться
Скачать
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Скачать руководство пользователя страница 466

Table 79:  PPP Disconnect Cause Codes  

(continued)

Description

Name

Code

Code 17 is generated only if an NCP configuration error has
prevented NCP negotiation from converging. This occurs when the
two peers do not agree on acceptable NCP parameters within the
time allowed for upper-layer negotiation.

Code 19 takes precedence over code 17 in situations related to
address convergence failure.

ncp no
negotiation
completed

17

No NCPs were successfully enabled within the time allowed for
upper-layer negotiation.

ncp no ncps
available

18

An NCP configuration error has prevented NCP negotiation from
converging on acceptable addresses. This occurs if the two peers
never agree on acceptable NCP addresses within the time allowed
for upper-layer negotiation.

■

Code 19 with direction 1 is generated if the peer denies address
parameters requested by the local NCP.

■

Code 19 with direction 2 is generated if the local NCP denies
address parameters requested by the peer.

The IPv6 interface identifier is considered an address for the purposes
of code 19.

Code 19 takes precedence over code 17 in situations related to
address convergence failure.

ncp addresses
failed to
converge

19

■

Code 20 with direction 2 indicates that an upper layer
negotiation was inhibited for any enabled NCP because the
required network-layer parameters were not available as a result
of the authentication stage.

■

Code 20 with direction 1 is never generated; the NCPs are never
enabled if there is no non-null local address.

ncp negotiation
inhibited

20

426

■

L2TP Disconnect Cause Codes

JUNOSe 11.1.x Broadband Access Configuration Guide

Содержание JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды