manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Руководство по настройке

Поделиться
Скачать
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Скачать руководство пользователя страница 403

■

server-name

■

source-address

■

tunnel

■

tunnel group

■

type

Mapping User Domain Names to L2TP Tunnels from Tunnel Group Tunnel Mode

To map a domain to an L2TP tunnel locally on the router from Tunnel Group Tunnel
Configuration mode, perform the following steps:

1.

Specify an AAA tunnel group and change the mode to Tunnel Group Tunnel
Configuration mode. From Tunnel Group Tunnel Configuration mode, you can
add up to 31 tunnel definitions.

host1(config)#

aaa tunnel-group westford

host1(config-tunnel-group)#

2.

Specify a tunnel to configure and enter Tunnel Group Tunnel Configuration mode:

host1(config-tunnel-group)#

tunnel 3

host1(config-tunnel-group-tunnel)#

3.

Specify a virtual router; in this case, the 

default

 router is specified.

host1(config-tunnel-group-tunnel)#

router-name default

4.

Specify the LNS endpoint address of a tunnel.

host1(config-tunnel-group-tunnel)#

address 192.0.2.13

5.

Specify a preference for the tunnel.

You can specify up to eight levels of preference, and you can assign the same
preference to a maximum of 31 tunnels. When you define multiple preferences
for a destination, you increase the probability of a successful connection.

host1(config-tunnel-group-tunnel)#

preference 5

6.

(Optional) Specify an authentication password for the tunnel.

host1(config-tunnel-group-tunnel)#

password temporary

NOTE:

If you specify a password for the LAC, the router requires that the peer (the

LNS) authenticate itself to the router. In this case, if the peer fails to authenticate
itself, the tunnel terminates.

7.

(Optional) Specify a hostname for the LAC end of the tunnel.

Mapping User Domain Names to L2TP Tunnels from Tunnel Group Tunnel Mode

■

363

Chapter 12: Configuring an L2TP LAC

Содержание JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды