manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Руководство по настройке

Поделиться
Скачать
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Скачать руководство пользователя страница 720

host1(config)#

service-management subscriber-session [email protected]

interface atm 4/0.1 service-session “video(4500000, 192.168.10.3)”

■

Example 2—Activate a single subscriber session with multiple service sessions

host1(config)#

service-management subscriber-session [email protected]

interface atm 4/0.1 service-session “video(4500000, 192.168.10.3)”

host1(config)#

service-management subscriber-session [email protected]

interface atm 4/0.1 service-session “tiered(1000000, 2000000)”

host1(config)#

service-management subscriber-session [email protected]

interface atm 4/0.1 service-session “voice(1000000, 10.10.10.1)”

■

Example 3—Include a service session profile when you activate a subscriber’s
service session

host1(config)#

service-management subscriber-session [email protected]

interface atm 4/0.1 service-session “video(4500000, 192.168.10.3)”
service-session-profile vodISP1

■

Use the 

no

 version to deactivate service sessions. See “Using the CLI to Deactivate

Subscriber Service Sessions” on page 683 for more information about deactivating
subscriber service sessions.

■

See service-management subscriber-session service-session

Preprovisioning Services

Preprovisioning service sessions is a technique you can use to improve Service
Manager’s performance. Typically, when you use a service definition to activate a
subscriber’s service session, Service Manager uses resources to build that service.
However, if you later use the same service definition to activate a service session for
a second subscriber, Service Manager does not have to rebuild the service—it bases
the new service on the service that it built for the first service session. After you
deactivate the first session, Service Manager must build a new service for any
subsequent subscribers.

Preprovisioning entails activating a service for a dummy user on the null interface.
You can then use the preprovisioned service session to activate service sessions for
actual subscribers. This technique improves performance because you only require
Service Manager to build the service one time, then reuse the original service when
you activate future subscriber service sessions.

To preprovision a service you use a command similar to the following example:

host1(config)#

service-management subscriber-session dummy interface null

service-session “tiered(1000000, 2000000)”

Using Service Session Profiles

Service session profiles provide additional flexibility to the Service Manager application
by enabling you to assign one or more supported attributes to a particular activation
of a service.

680

■

Using the CLI to Manage Subscriber Service Sessions

JUNOSe 11.1.x Broadband Access Configuration Guide

Содержание JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды