manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Руководство по настройке

Поделиться
Скачать
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Скачать руководство пользователя страница 277

■

Example

host1(config)#

radius include l2cd-acc-loop-cir-id acct-start enable

■

Use the 

no

 version to restore the default behavior, disable.

NOTE:

JUNOSe software continues to support DSL Forum VSAs (vendor ID 3561)

that you can use to include DSL-related information in RADIUS messages. See “DSL
Forum VSAs” on page 276.

■

See radius include

Related Topics

■

To display a list of attributes that are included in RADIUS messages, see
Monitoring Included RADIUS Attributes on page 308

DSL Forum Vendor-Specific Attributes

You can use the 

radius include dsl-forum-attributes

 command to control the

inclusion of a set of DSL Forum VSAs in Access-Request, Acct-Start, Acct-Stop, and
(if Acct-Stop messages are specified) Interim-Acct messages that the router sends to
RADIUS.

The DSL Forum VSAs, as defined in RFC 4679—DSL Forum Vendor-Specific RADIUS
Attributes (September 2006), convey information about the associated subscriber
for and data rate of the DSL. A service provider might find it useful to enable inclusion
of the DSL Forum VSAs in RADIUS messages in order to bill subscribers for different
classes of service based on the data rate of their DSL connection.

NOTE:

JUNOSe software also supports several Juniper Networks VSAs that you can

use to include DSL-related information. See “ANCP-Related Juniper Networks VSAs”
on page 235 and “Juniper Networks VSAs” on page 265 .

The router receives data containing one or more of the DSL Forum VSAs from a
DSLAM connected to the router via a PPPoE interface. When you enable the inclusion
of the DSL Forum VSAs in these RADIUS messages, the router includes all of the
following attributes in the specified message type, provided that the VSA is available
in the information that the router receives from the DSLAM.

NOTE:

 The router uses the vendor ID assigned to the DSL Forum (3561, or DE9 in

hexadecimal format) by the Internet Assigned Numbers Authority (IANA) for the DSL
Forum VSAs.

Maximum-Data-Rate-Downstream [26-136]

Agent-Circuit-Id [26-1]

CLI Commands Used to Modify RADIUS Attributes

■

237

Chapter 3: Configuring RADIUS Attributes

Содержание JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды