manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Руководство по настройке

Поделиться
Скачать
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Скачать руководство пользователя страница 430

Tunnel   Tunnel   Tunnel   Tunnel   Tunnel    Tunnel    Tunnel   Client
 Tag      Peer    Source    Type    Medium   Password     Id      Name
------   ------   ------   ------   ------   --------   ------   ------
3        <null>   <null>   l2tp     ipv4     <null>     <null>   <null>
         Tunnel                 Tunnel
Tunnel   Server     Tunnel       Max      Tunnel
 Tag      Name    Preference   Sessions    RWS
------   ------   ----------   --------   ------
3        <null>   2000         0          4

You can also configure the RWS for a tunnel on the LAC by including the
L2tp-Recv-Window-Size RADIUS attribute (VSA 26-54) in RADIUS Access-Accept
messages. For more information about RADIUS Access-Accept messages, see
“Configuring RADIUS Attributes” on page 171. For more information about the
L2tp-Recv-Window-Size attribute, see “RADIUS IETF Attributes” on page 259.

Configuring the Receive Window Size on the LNS

Use the 

receive-window

 command to configure the L2TP RWS for a tunnel on the

LNS. Use the 

no

 version of the command to revert to the systemwide RWS setting

configured with the 

l2tp tunnel default-receive-window

 command.

To configure the RWS for a tunnel on the LNS:

1.

Access L2TP Destination Profile Host Configuration mode. For example:

host1(config)#

virtual-router fms02

host1:fms02(config)#

l2tp destination profile fms02 ip address 192.168.5.61

host1:fms02(config-l2tp-dest-profile)#

remote host fms03

host1:fms02(config-l2tp-dest-profile-host)#

2.

From Destination Profile Host Configuration mode, set the tunnel RWS. The only
value supported for the tunnel RWS is 4.

host1:fms02(config-l2tp-dest-profile-host)#

receive-window 4

TIP:

If you modify the RWS setting of a host profile for an existing tunnel, the router

drops the tunnel. This action is consistent with router behavior when you modify an
L2TP host profile.

3.

(Optional) Use the 

show l2tp destination profile

 command to verify the RWS

configuration.

host1:fms02#

show l2tp destination profile fms02

L2TP destination profile fms02
Destination address
  Transport ipUdp
  Virtual router fms02
  Peer address 192.168.5.61
Host profile attributes
  Remote host is fms03
    Receive window size is 4
1 L2TP host profile found

390

■

Configuring the Receive Window Size on the LNS

JUNOSe 11.1.x Broadband Access Configuration Guide

Содержание JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды