Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Руководство по настройке

Страница: 310 / 794

Table 50: Juniper Networks (Vendor ID 4874) VSA Formats (continued)
Value
Subtype
Length
Length Description Attribute Name
Attribute
Number
Salt encrypted IP
address sublen len IP address of analyzer device to which
mirrored packets are forwarded Med-Ip-Address [26-60]
Salt encrypted integer sublen len UDP port in the analyzer device to which
mirrored packets are forwarded Med-Port-Number [26-61]
string:mlppp-bundle-
name sublen len Text string that identifies the Multilink PPP
bundle name MLPPP-Bundle-Name [26-62]
string:interface-
description sublen len Text string that identifies the subscriber’s
access interface Interface-Desc [26-63]
string:tunnel-group-
name sublen len Name of the tunnel group assigned to a
domain map Tunnel-Group [26-64]
string:service-name sublen len Service to activate for the subscriber Activate-Service [26-65]
string:service-name sublen len Service to deactivate for the subscriber Deactivate-Service [26-66]
integer: volume in
MB; 0 = infinite
volume 6 12 Amount of traffic, in MB, that can use the
service; service is deactivated when the
volume is exceeded Service-Volume-tagX [26-67]
integer: time in
seconds; 0 = no
timeout 6 12 Number of seconds that the service can be
active; service is deactivated when the
timeout expires Service-Timeout-tagX [26-68]
integer: 0 = disable;
1 = enable time
statistics;
2 = enable time and
volume statistics 6 12 Enable or disable statistics for the service Service-Statistics-tagX [26-69]
integer: 0 = disable;
1 = enable 6 12 Enable or disable the ignore don’t fragment
(DF) bit feature on a B-RAS user's interface Ignore-DF-Bit [26-70]
string:32-octet sublen len Access List to use for the group (G) filter IGMP-Access-Name [26-71]
string:32-octet sublen len Access List to use for the source-group (S,G)
filter IGMP-Access-Src-Name [26-72]
string:32-octet sublen len Multicast OIF (outgoing interface) mapping IGMP-OIF-Map-Name [26-73]
string:32-octet sublen len Access List to use for the group (G) filter MLD-Access-Name [26-74]
string:32-octet sublen len Access List to use for the source-group (S,G)
filter MLD-Access-Src-Name [26-75]
string:32-octet sublen len Multicast OIF (outgoing interface) mapping MLD-OIF-Map-Name [26-76]
integer:1-octet 6 12 MLD Protocol Version (MLD Version 1 =
1; MLD Version 2 = 2) MLD-Version [26-77]
270 ■
Juniper Networks VSAs
JUNOSe 11.1.x Broadband Access Configuration Guide