manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Руководство по настройке

Поделиться
Скачать
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Скачать руководство пользователя страница 118

Table 5:  RADIUS IETF Attributes in Preauthentication Request

Description

Attribute Name

Attribute
Number

Name of the user associated with the LLID, in the format:

NAS-Port:<NAS-IP-Address>:<Nas-Port-Id>

For example, nas-port:172.28.30.117:atm 4/1.104:2.104

User-Name

[1]

Password of the user to be authenticated; always set to “
juniper”

User-Password

[2]

IP address of the network access server (NAS) that is
requesting authentication of the user; for example,
172.28.30.117

NAS-IP-Address

[4]

Physical port number of the NAS that is authenticating the
user; this is always interpreted as a bit field

NAS-Port

[5]

Type of service the user has requested or the type of service
to be provided; for example, framed

Service-Type

[6]

Type of physical port the NAS is using to authenticate the
user

NAS-Port-Type

[61]

Actual user name; for example, [email protected]

Connect-Info

[77]

Text string that identifies the physical interface of the NAS
that is authenticating the user; for example,
atm 4/1.104:2.104

NAS-Port-Id

[87]

The use of 

radius

 commands such as 

radius calling-station-format

 or 

radius

override calling-station-id

 to control or change the inclusion of these attributes in

the preauthentication request has no effect.

For more information about these attributes, see “RADIUS IETF Attributes” on
page 259.

Considerations for Using the LLID

The following considerations apply when you configure the router for subscriber
preauthentication:

■

Only PPP subscribers authenticating through RADIUS can use the AAA LLID
feature on the router. PPP subscribers tunneled through domain maps cannot
take advantage of this feature.

■

The Calling-Station-Id [31] attribute is typically sent in RADIUS Access-Request
messages, not in Access-Accept messages as is the case for this feature. As a
result, your RADIUS server might require special configuration procedures to
enable the Calling-Station-Id attribute to be returned in Access-Accept messages.
See the documentation that came with your RADIUS server for information.

78

■

Using the AAA Logical Line Identifier to Track Subscribers

JUNOSe 11.1.x Broadband Access Configuration Guide

Содержание JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды