manualshive.com logo in svg

Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010, Руководство по настройке

Поделиться
Скачать
Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Скачать руководство пользователя страница 386

(1 hour), for which the router attempts to maintain dynamic destinations, tunnels,
and sessions after they have been destroyed. The router uses a timeout of 600 seconds
by default.

This command facilitates debugging and other analysis by saving underlying memory
structures after the destination, tunnel, or session is terminated.

Any specific dynamic destination, tunnel, or session may not be maintained for this
entire time period if the resources must be reclaimed early to allow new tunnels to
be established.

TIP:

If you use the 

l2tp destination lockout timeout

 command to configure an

optional lockout timeout, always configure the destruct timeout to be longer than
the lockout timeout. The destruct timeout overrides the lockout timeout—when the
destruct timeout expires, all information about the locked out destination is deleted,
including the lockout timeout and lockout test settings. See “Managing the L2TP
Destination Lockout Process” on page 366.

■

To specify a destruct timeout:

host1(config)#

l2tp destruct-timeout 1200

Related Topics

■

l2tp destruct-timeout

Preventing Creation of New Destinations, Tunnels, and Sessions

You can configure several L2TP drain operations, which determine how the router
creates new L2TP destinations, tunnels, and sessions. You can manage the following
features:

1.

Preventing Creation of New Destinations, Tunnels, and Sessions on the
Router on page 346

2.

Preventing Creation of New Tunnels and Sessions at a Destination on page 347

3.

Preventing Creation of New Sessions for a Tunnel on page 347

4.

Specifying a Drain Timeout for a Disconnected Tunnel on page 347

Preventing Creation of New Destinations, Tunnels, and Sessions on the Router

You use the 

l2tp drain

 command to prevent the creation of new destinations, tunnels,

and sessions on the router.

The 

l2tp drain

 command and the 

l2tp shutdown

 command both affect the

administrative state of L2TP on the router. Although each command has a different
effect, the 

no

 version of each command is equivalent. Each command’s 

no

 version

leaves L2TP in the enabled state.

■

To prevent the creation of new destinations, tunnels, and sessions:

346

■

Preventing Creation of New Destinations, Tunnels, and Sessions

JUNOSe 11.1.x Broadband Access Configuration Guide

Содержание JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010



























































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды